| Patch | Description | Author | Forwarded | Bugs | Origin | Last update |
|---|---|---|---|---|---|---|
| bugfix/all/radeon-amdgpu-firmware-is-required-for-drm-and-kms-on-r600-onward.patch | radeon, amdgpu: Firmware is required for DRM and KMS on R600 onward radeon requires firmware/microcode for the GPU in all chips, but for newer chips (apparently R600 'Evergreen' onward) it also expects firmware for the memory controller and other sub-blocks. radeon attempts to gracefully fall back and disable some features if the firmware is not available, but becomes unstable - the framebuffer and/or system memory may be corrupted, or the display may stay black. Therefore, perform a basic check for the existence of /lib/firmware/radeon when a device is probed, and abort if it is missing, except for the pre-R600 case. Update 2023-11-08: In bug 1053764 Mario Limonciello <mario.limonciello@amd.com> states that the patch isn't needed anymore for amdgpu, so remove that part of the patch |
Ben Hutchings <ben@decadent.org.uk> | no | debian | 2023-11-08 | |
| debian/af_802154-Disable-auto-loading-as-mitigation-against.patch | [PATCH 2/3] af_802154: Disable auto-loading as mitigation against local exploits Recent review has revealed several bugs in obscure protocol implementations that can be exploited by local users for denial of service or privilege escalation. We can mitigate the effect of any remaining vulnerabilities in such protocols by preventing unprivileged users from loading the modules, so that they are only exploitable on systems where the administrator has chosen to load the protocol. The 'af_802154' (IEEE 802.15.4) protocol is not widely used, was not present in the 'lenny' kernel, and seems to receive only sporadic maintenance. Therefore disable auto-loading. |
Ben Hutchings <ben@decadent.org.uk> | not-needed | 2010-11-19 | ||
| debian/rds-Disable-auto-loading-as-mitigation-against-local.patch | [PATCH 1/3] rds: Disable auto-loading as mitigation against local exploits Recent review has revealed several bugs in obscure protocol implementations that can be exploited by local users for denial of service or privilege escalation. We can mitigate the effect of any remaining vulnerabilities in such protocols by preventing unprivileged users from loading the modules, so that they are only exploitable on systems where the administrator has chosen to load the protocol. The 'rds' protocol is one such protocol that has been found to be vulnerable, and which was not present in the 'lenny' kernel. Therefore disable auto-loading. |
Ben Hutchings <ben@decadent.org.uk> | not-needed | 2010-11-19 | ||
| debian/dccp-disable-auto-loading-as-mitigation-against-local-exploits.patch | dccp: Disable auto-loading as mitigation against local exploits We can mitigate the effect of vulnerabilities in obscure protocols by preventing unprivileged users from loading the modules, so that they are only exploitable on systems where the administrator has chosen to load the protocol. The 'dccp' protocol is not actively maintained or widely used. Therefore disable auto-loading. |
Ben Hutchings <ben@decadent.org.uk> | not-needed | 2017-02-16 | ||
| debian/hamradio-disable-auto-loading-as-mitigation-against-local-exploits.patch | hamradio: Disable auto-loading as mitigation against local exploits We can mitigate the effect of vulnerabilities in obscure protocols by preventing unprivileged users from loading the modules, so that they are only exploitable on systems where the administrator has chosen to load the protocol. The 'ham' radio protocols (ax25, netrom, rose) are not actively maintained or widely used. Therefore disable auto-loading. |
Ben Hutchings <ben@decadent.org.uk> | not-needed | 2019-08-05 | ||
| debian/fs-enable-link-security-restrictions-by-default.patch | fs: Enable link security restrictions by default This reverts commit 561ec64ae67ef25cac8d72bb9c4bfc955edfd415 ('VFS: don't do protected {sym,hard}links by default'). |
Ben Hutchings <ben@decadent.org.uk> | not-needed | debian | 2012-11-02 | |
| debian/yama-disable-by-default.patch | yama: Disable by default | Ben Hutchings <ben@decadent.org.uk> | not-needed | debian | 2013-06-19 | |
| debian/add-sysctl-to-disallow-unprivileged-CLONE_NEWUSER-by-default.patch | add sysctl to disallow unprivileged CLONE_NEWUSER by default add sysctl to disallow unprivileged CLONE_NEWUSER by default This is a short-term patch. Unprivileged use of CLONE_NEWUSER is certainly an intended feature of user namespaces. However for at least saucy we want to make sure that, if any security issues are found, we have a fail-safe. [bwh: Remove unneeded binary sysctl bits] [bwh: Keep this sysctl, but change the default to enabled] |
Serge Hallyn <serge.hallyn@canonical.com> | no | http://kernel.ubuntu.com/git?p=serge%2Fubuntu-saucy.git;a=commit;h=5c847404dcb2e3195ad0057877e1422ae90892b8 | 2013-05-31 | |
| debian/gitignore.patch | Tweak gitignore for Debian pkg-kernel using git [bwh: Tweak further for pure git] |
Ian Campbell <ijc@hellion.org.uk> | not-needed | 2013-01-17 | ||
| debian/dfsg/arch-powerpc-platforms-8xx-ucode-disable.patch | Remove microcode patches for mgsuvd (not enabled in Debian configs) diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig index 48a920a..81570b6 100644 |
Ben Hutchings <ben@decadent.org.uk> | not-needed | 2009-04-13 | ||
| debian/dfsg/drivers-media-dvb-dvb-usb-af9005-disable.patch | dvb-usb-af9005: mark as broken | Ben Hutchings <ben@decadent.org.uk> | not-needed | 2009-08-17 | ||
| debian/dfsg/video-remove-nvidiafb-and-rivafb.patch | video: Remove nvidiafb and rivafb These drivers contain register programming code provided by the hardware vendor that appears to have been deliberately obfuscated. This is arguably not the preferred form for modification. These drivers are also largely redundant with nouveau. The RIVA 128 (NV3) is not supported by nouveau but is about 15 years old and probably discontinued 10 years ago. |
Ben Hutchings <ben@decadent.org.uk> | no | debian | 2012-06-02 | |
| debian/dfsg/documentation-fix-broken-link-to-cipso-draft.patch | Documentation: Fix broken link to CIPSO draft We exclude the CIPSO draft text as its licence is not DFSG compliant. Link to the IETF's online version instead. |
Ben Hutchings <ben@decadent.org.uk> | not-needed | 2019-08-24 | ||
| debian/version.patch | Include package version along with kernel release in stack traces For distribution binary packages we assume $DISTRIBUTION_OFFICIAL_BUILD, $DISTRIBUTOR and $DISTRIBUTION_VERSION are set. |
Ben Hutchings <ben@decadent.org.uk> | not-needed | 2012-07-24 | ||
| debian/uname-version-timestamp.patch | Make mkcompile_h accept an alternate timestamp string We want to include the Debian version in the utsname::version string instead of a full timestamp string. However, we still need to provide a standard timestamp string for gen_initramfs_list.sh to make the kernel image reproducible. Make mkcompile_h use $KBUILD_BUILD_VERSION_TIMESTAMP in preference to $KBUILD_BUILD_TIMESTAMP. =================================================================== |
Ben Hutchings <ben@decadent.org.uk> | not-needed | 2015-05-12 | ||
| debian/kernelvariables.patch | kbuild: Make the toolchain variables easily overwritable Allow make variables to be overridden for each flavour by a file in the build tree, .kernelvariables. We currently use this for ARCH, KERNELRELEASE, CC, and in some cases also CROSS_COMPILE, KCFLAGS. This file can only be read after we establish the build tree, and all use of $(ARCH) needs to be moved after this. [bwh: Updated for 5.3: include .kernelvariables from current directory rather than using undefined $(obj).] |
Bastian Blank <waldi@debian.org> | not-needed | 2009-02-22 | ||
| debian/mips-boston-disable-its.patch | Disable uImage generation for mips generic MIPS generic trys to generate uImage when build, which then ask for u-boot-tools. [bwh: Updated for 5.17: - zload-y is no longer assigned here and appears to default to empty - Adjust context] |
YunQiang Su <syq@debian.org> | not-needed | 2018-05-14 | ||
| debian/mips-ieee754-relaxed.patch | Use RELAXED ieee754 mode for Loongson-3 as 3A 4000 is 2008-only There are 2 mode of value of IEEE NaN hardcoded by CPU. Currently, our mipsel/mips64el port is in so-called lagacy mode. Loongson 3A 4000 is set as the so-called 2008 mode. To make Debian workable on Loongson 3A 4000, we need set the kerenl in RELAXED mode. https://web.archive.org/web/20180830093617/https://dmz-portal.mips.com/wiki/MIPS_ABI_-_NaN_Interlinking [bwh: Update for addition of EMULATED mode in 6.11] |
YunQiang Su <syq@debian.org> | not-needed | 2020-11-16 | ||
| debian/mips-enable-r2-to-r6-emu-by-default.patch | Enable R2 to R6 emulator by default In upstream code, 'mipsr2emu' kernel option is needed to enable R2 to R6 emulator. Since we need r6 kernel for our r2 port, let's always enable it. |
YunQiang Su <syq@debian.org> | not-needed | 2018-05-14 | ||
| debian/arch-sh4-fix-uimage-build.patch | [sh4] Fix uImage build [bwh: This was added without a description, but I think it is done only to avoid a build-dependency on u-boot-tools.] |
Nobuhiro Iwamatsu <iwamatsu@nigauri.org> | not-needed | debian | ||
| debian/tools-perf-perf-read-vdso-in-libexec.patch | linux-tools: Install perf-read-vdso{,x}32 in directory under /usr/lib | Ben Hutchings <benh@debian.org> | no | 2015-05-11 | ||
| debian/tools-perf-install-python-bindings.patch | tools: install perf python bindings | Adriaan Schmidt <adriaan.schmidt@siemens.com> | not-needed | debian | 2022-04-04 | |
| debian/wireless-add-debian-wireless-regdb-certificates.patch | wireless: Add Debian wireless-regdb certificates This hex dump is generated using: { for cert in debian/certs/wireless-regdb-*.pem; do openssl x509 -in $cert -outform der; done } | hexdump -v -e '1/1 "0x%.2x," "\n"' > net/wireless/certs/debian.hex |
Ben Hutchings <ben@decadent.org.uk> | not-needed | 2018-04-13 | ||
| debian/export-symbols-needed-by-android-drivers.patch | Export symbols needed by binder We want to enable use of the Android binder driver to support Waydroid, but it should not be built-in as that would waste resources and increase security attack surface on systems that don't need it. Export the currently un-exported symbols it depends on. |
Ben Hutchings <ben@decadent.org.uk> | no | debian | 2024-08-05 | |
| debian/android-enable-building-ashmem-and-binder-as-modules.patch | android: Enable building ashmem and binder as modules We want to enable use of the Android ashmem and binder drivers to support Anbox, but they should not be built-in as that would waste resources and increase security attack surface on systems that don't need them. - Add a MODULE_LICENSE declaration to ashmem - Change the Makefiles to build each driver as an object with the "_linux" suffix (which is what Anbox expects) - Change config symbol types to tristate Update: In upstream commit 721412ed3d titled "staging: remove ashmem" the ashmem driver was removed entirely. Secondary commit message: "The mainline replacement for ashmem is memfd, so remove the legacy code from drivers/staging/" Consequently, the ashmem part of this patch has been removed. |
Ben Hutchings <ben@decadent.org.uk> | no | debian | 2018-06-22 | |
| debian/documentation-drop-sphinx-version-check.patch | [PATCH 1/2] Documentation: Drop sphinx version check | Bastian Blank <waldi@debian.org> | not-needed | 2020-08-04 | ||
| debian/perf-traceevent-support-asciidoctor-for-documentatio.patch | [PATCH 2/2] perf/traceevent: Support asciidoctor for documentation | Bastian Blank <waldi@debian.org> | not-needed | 2020-08-04 | ||
| debian/kbuild-look-for-module.lds-under-arch-directory-too.patch | kbuild: Look for module.lds under arch directory too The module.lds linker script is now built under the scripts directory, where previously it was under arch/$(SRCARCH). However, we package the scripts directory as linux-kbuild, which is meant to be able to do support native and cross-builds. That means it shouldn't contain files for a specific target architecture without a wrapper to select between them, and it doesn't appear that linker scripts are powerful enough to implement such a wrapper. Building module.lds in a different location would require relatively large changes. Moving it in the package build rules can work, but we need to support custom kernel builds from the same source so we can't assume it's moved. Therefore, we move module.lds under the arch build directory in rules.real and change Makefile.modfinal to look for it in both places. |
Ben Hutchings <benh@debian.org> | not-needed | debian | 2020-12-10 | |
| debian/kbuild-abort-build-if-subdirs-used.patch | kbuild: Abort build if SUBDIRS used DKMS and module-assistant both build OOT modules as root. If they build an old OOT module that still use SUBDIRS this causes Kbuild to try building a full kernel, which obviously fails but not before deleting files from the installed headers package. To avoid such mishaps, detect this situation and abort the build. The error message is based on that used in commit 0126be38d988 "kbuild: announce removal of SUBDIRS if used". |
Ben Hutchings <benh@debian.org> | not-needed | debian | 2021-04-26 | |
| debian/makefile-make-compiler-version-comparison-optional.patch | Makefile: Make compiler version comparison optional The top-level Makefile warns if the compiler version string changes at all between the kernel build and an out-of-tree module build. We expect that major compiler version changes could introduce ABI changes, and override the CC variable in out-of-tree module builds to ensure that the same major compiler version is used. But minor version changes should not make a difference, so this exact version comparison produces false warnings. Since custom kernel packages don't have that, don't remove the version comparison. Instead, skip it if $(DEBIAN_KERNEL_NO_CC_VERSION_CHECK) is non-empty. |
Ben Hutchings <benh@debian.org> | not-needed | debian | 2022-09-15 | |
| bugfix/all/revert-tools-build-clean-cflags-and-ldflags-for-fixdep.patch | Revert "tools build: Clean CFLAGS and LDFLAGS for fixdep" This reverts commit 5725dd8fa888b4dcdff58241f9d3d3ac42a048e2. That was a workaround for the bug fixed by commit 6b3db6f9b970 "tools |
Ben Hutchings <benh@debian.org> | no | 2024-09-16 | ||
| debian/fixdep-allow-overriding-hostcc-and-hostld.patch | fixdep: Allow overriding HOSTCC and HOSTLD objtool always uses HOSTCC, HOSTLD, and HOSTAR, so we need to override these on the command line for cross-builds of linux-kbuild. But it also builds fixdep which still needs to be native in a cross-build. Add support for REALHOSTCC and REALHOSTLD variables which, if set, override HOSTCC and HOSTLD for fixdep only. |
Ben Hutchings <benh@debian.org> | not-needed | 2023-05-13 | ||
| debian/linux-perf-remove-remaining-source-filenames-from-executable.patch | linux-perf: Remove remaining source filenames from executable When we build perf with -ffile-prefix-map, there are still 2 source directory names embedded in the executable: 1. The Documentation subdirectory, used as a fallback from the installed location. 2. The python subdirectory, used in the Python script test. Remove (1) since it is an unnecessary fallback. Change (2) to the installed location. |
Ben Hutchings <benh@debian.org> | no | 2023-05-30 | ||
| features/all/drivers-media-dvb-usb-af9005-request_firmware.patch | af9005: Use request_firmware() to load register init script Read the register init script from the Windows driver. This is sick but should avoid the potential copyright infringement in distributing a version of the script which is directly derived from the driver. |
Ben Hutchings <ben@decadent.org.uk> | no | 2009-08-24 | ||
| debian/iwlwifi-do-not-request-unreleased-firmware.patch | iwlwifi: Do not request unreleased firmware for IWL6000 The iwlwifi driver currently supports firmware API versions 4-6 for these devices. It will request the file for the latest supported version and then fall back to earlier versions. However, the latest version that has actually been released is 4, so we expect the requests for versions 6 and then 5 to fail. The installer appears to report any failed request, and it is probably not easy to detect that this particular failure is harmless. So stop requesting the unreleased firmware. |
Ben Hutchings <ben@decadent.org.uk> | not-needed | debian | ||
| debian/firmware_loader-log-direct-loading-failures-as-info-for-d-i.path | firmware_loader: Log direct loading failures as info for d-i On an installed Debian system, firmware packages will normally be installed automatically based on a mapping of device IDs to firmware. Within the Debian installer this has not yet happened and we need a way to detect missing firmware. Although many/most drivers log firmware loading failures, they do so using many different formats. This adds a single log message to the firmware loader, which the installer's hw-detect package will look for. The log level is set to "info" because some failures are expected and we do not want to confuse users with bogus error messages (like in bug #966218). this with the check-missing-firmware.sh in hw-detect. |
Ben Hutchings <benh@debian.org> | not-needed | 2024-05-30 | ||
| features/all/security-perf-allow-further-restriction-of-perf_event_open.patch | security,perf: Allow further restriction of perf_event_open When kernel.perf_event_open is set to 3 (or greater), disallow all access to performance events by users without CAP_SYS_ADMIN. Add a Kconfig symbol CONFIG_SECURITY_PERF_EVENTS_RESTRICT that makes this value the default. This is based on a similar feature in grsecurity (CONFIG_GRKERNSEC_PERF_HARDEN). This version doesn't include making the variable read-only. It also allows enabling further restriction at run-time regardless of whether the default is changed. |
Ben Hutchings <ben@decadent.org.uk> | yes | 2016-01-11 | ||
| features/x86/intel-iommu-add-option-to-exclude-integrated-gpu-only.patch | intel-iommu: Add option to exclude integrated GPU only There is still laptop firmware that touches the integrated GPU behind the operating system's back, and doesn't say so in the RMRR table. Enabling the IOMMU for all devices causes breakage, but turning it off for all graphics devices seems like a major weakness. Add an option, intel_iommu=intgpu_off, to exclude only integrated GPUs from remapping. This is a narrower exclusion than igfx_off: it only affects Intel devices on the root bus. Devices attached through an external port (Thunderbolt or ExpressCard) won't be on the root bus. |
Ben Hutchings <ben@decadent.org.uk> | no | debian | 2019-08-21 | |
| features/x86/intel-iommu-add-kconfig-option-to-exclude-igpu-by-default.patch | intel-iommu: Add Kconfig option to exclude iGPU by default There is still laptop firmware that touches the integrated GPU behind the operating system's back, and doesn't say so in the RMRR table. Enabling the IOMMU for all devices causes breakage. Replace CONFIG_INTEL_IOMMU_DEFAULT_ON with a 3-way choice corresponding to "on", "off", and "on,intgpu_off". |
Ben Hutchings <ben@decadent.org.uk> | no | debian | 2019-08-21 | |
| debian/cdc_ncm-cdc_mbim-use-ncm-by-default.patch | cdc_ncm,cdc_mbim: Use NCM by default Devices that support both NCM and MBIM modes should be kept in NCM mode unless there is userland support for MBIM. Set the default value of cdc_ncm.prefer_mbim to false and leave it to userland (modem-manager) to override this with a modprobe.conf file once it's ready to speak MBIM. |
Ben Hutchings <ben@decadent.org.uk> | not-needed | 2013-03-31 | ||
| debian/snd-pcsp-disable-autoload.patch | snd-pcsp: Disable autoload There are two drivers claiming the platform:pcspkr device: - pcspkr creates an input(!) device that can only beep - snd-pcsp creates an equivalent input device plus a PCM device that can play barely recognisable renditions of sampled sound snd-pcsp is blacklisted by the alsa-base package, but not everyone installs that. On PCs where no sound is wanted at all, both drivers will still be loaded and one or other will complain that it couldn't claim the relevant I/O range. In case anyone finds snd-pcsp useful, we continue to build it. But remove the alias, to ensure it's not loaded where it's not wanted. |
Ben Hutchings <ben@decadent.org.uk> | not-needed | debian | 2014-02-05 | |
| bugfix/x86/viafb-autoload-on-olpc-xo1.5-only.patch | viafb: Autoload on OLPC XO 1.5 only It appears that viafb won't work automatically on all the boards for which it has a PCI device ID match. Currently, it is blacklisted by udev along with most other framebuffer drivers, so this doesn't matter much. However, this driver is required for console support on the XO 1.5. We need to allow it to be autoloaded on this model only, and then un-blacklist it in udev. |
Ben Hutchings <ben@decadent.org.uk> | no | debian | 2013-04-20 | |
| debian/fjes-disable-autoload.patch | fjes: Disable auto-loading fjes matches a generic ACPI device ID, and relies on its probe function to distinguish whether that really corresponds to a supported device. Very few system will need the driver and it wastes memory on all the other systems where the same device ID appears, so disable auto-loading. |
Ben Hutchings <ben@decadent.org.uk> | no | debian | 2017-03-18 | |
| debian/fanotify-taint-on-use-of-fanotify_access_permissions.patch | fanotify: Taint on use of FANOTIFY_ACCESS_PERMISSIONS Various free and proprietary AV products use this feature and users apparently want it. But punting access checks to userland seems like an easy way to deadlock the system, and there will be nothing we can do about that. So warn and taint the kernel if this feature is actually used. |
Ben Hutchings <ben@decadent.org.uk> | not-needed | 2016-07-13 | ||
| debian/btrfs-warn-about-raid5-6-being-experimental-at-mount.patch | btrfs: warn about RAID5/6 being experimental at mount time Too many people come complaining about losing their data -- and indeed, there's no warning outside a wiki and the mailing list tribal knowledge. Message severity chosen for consistency with XFS -- "alert" makes dmesg produce nice red background which should get the point across. [bwh: Also add_taint() so this is flagged in bug reports] [2023-01-10: still accurate according to btrfs-progs own manpage: https://git.kernel.org/pub/scm/linux/kernel/git/kdave/btrfs-progs.git/commit/?id=922797e15590b836e377d6dc47b828356cafc2a9] [2024-03-17: still accurate; manpage is now in Documentation/btrfs-man5.rst implementation went from disk-io.c to super.c; forwarded the issue] |
Adam Borowski <kilobyte@angband.pl> | yes | debian | https://bugs.debian.org/863290#5 | 2017-03-28 |
| bugfix/arm/arm-dts-kirkwood-fix-sata-pinmux-ing-for-ts419.patch | ARM: dts: kirkwood: Fix SATA pinmux-ing for TS419 The old board code for the TS419 assigns MPP pins 15 and 16 as SATA activity signals (and none as SATA presence signals). Currently the device tree assigns the SoC's default pinmux groups for SATA, which conflict with the second Ethernet port. |
Ben Hutchings <ben@decadent.org.uk> | yes | debian | 2017-02-17 | |
| bugfix/x86/perf-tools-fix-unwind-build-on-i386.patch | perf tools: Fix unwind build on i386 EINVAL may not be defined when building unwind-libunwind.c with REMOTE_UNWIND_LIBUNWIND, resulting in a compiler error in LIBUNWIND__ARCH_REG_ID(). Its only caller, access_reg(), only checks for a negative return value and doesn't care what it is. So change -EINVAL to -1. |
Ben Hutchings <ben@decadent.org.uk> | no | 2017-07-22 | ||
| bugfix/sh/sh-boot-do-not-use-hyphen-in-exported-variable-name.patch | sh: Do not use hyphen in exported variable names arch/sh/Makefile defines and exports ld-bfd to be used by arch/sh/boot/Makefile and arch/sh/boot/compressed/Makefile. However some shells, including dash, will not pass through environment variables whose name includes a hyphen. Usually GNU make does not use a shell to recurse, but if e.g. $(srctree) contains '~' it will use a shell here. Rename the variable to ld_bfd. (Another instance of this problem was fixed upstream by commit 82977af93a0d "sh: rename suffix-y to suffix_y".) |
Ben Hutchings <ben@decadent.org.uk> | no | 2022-02-07 | ||
| bugfix/arm/arm-mm-export-__sync_icache_dcache-for-xen-privcmd.patch | ARM: mm: Export __sync_icache_dcache() for xen-privcmd The xen-privcmd driver, which can be modular, calls set_pte_at() which in turn may call __sync_icache_dcache(). The call to __sync_icache_dcache() may be optimised out because it is conditional on !pte_special(), and xen-privcmd calls pte_mkspecial(). However, in a non-LPAE configuration there is no "special" bit and the call is really unconditional. |
Ben Hutchings <ben@decadent.org.uk> | yes | 2018-07-11 | ||
| bugfix/powerpc/powerpc-boot-fix-missing-crc32poly.h-when-building-with-kernel_xz.patch | powerpc/boot: Fix missing crc32poly.h when building with KERNEL_XZ After commit faa16bc404d7 ("lib: Use existing define with polynomial") the lib/xz/xz_crc32.c includes a header from include/linux directory thus any other user of this code should define proper include path. This fixes the build error on powerpc with CONFIG_KERNEL_XZ: In file included from ../arch/powerpc/boot/../../../lib/decompress_unxz.c:233:0, from ../arch/powerpc/boot/decompress.c:42: ../arch/powerpc/boot/../../../lib/xz/xz_crc32.c:18:29: fatal error: linux/crc32poly.h: No such file or directory |
Krzysztof Kozlowski <krzk@kernel.org> | no | https://patchwork.ozlabs.org/patch/963258/ | 2018-08-29 | |
| bugfix/arm64/arm64-acpi-Add-fixup-for-HPE-m400-quirks.patch | arm64/acpi: Add fixup for HPE m400 quirks Adds a new ACPI init routine acpi_fixup_m400_quirks that adds a work-around for HPE ProLiant m400 APEI firmware problems. The work-around disables APEI when CONFIG_ACPI_APEI is set and m400 firmware is detected. Without this fixup m400 systems experience errors like these on startup: [Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 2 [Hardware Error]: event severity: fatal [Hardware Error]: Error 0, type: fatal [Hardware Error]: section_type: memory error [Hardware Error]: error_status: 0x0000000000001300 [Hardware Error]: error_type: 10, invalid address Kernel panic - not syncing: Fatal hardware error! [bwh: Adjust context and indentation to apply to Linux 6.10] |
Geoff Levand <geoff@infradead.org> | yes | 2018-06-13 | ||
| features/x86/x86-memtest-WARN-if-bad-RAM-found.patch | x86: memtest: WARN if bad RAM found Since this is not a particularly thorough test, if we find any bad bits of RAM then there is a fair chance that there are other bad bits we fail to detect. |
Ben Hutchings <ben@decadent.org.uk> | yes | debian | 2011-12-05 | |
| features/x86/x86-make-x32-syscall-support-conditional.patch | x86: Make x32 syscall support conditional on a kernel parameter Enabling x32 in the standard amd64 kernel would increase its attack surface while provide no benefit to the vast majority of its users. No-one seems interested in regularly checking for vulnerabilities specific to x32 (at least no-one with a white hat). Still, adding another flavour just to turn on x32 seems wasteful. And the only differences on syscall entry are a few instructions that mask out the x32 flag and compare the syscall number. Use a static key to control whether x32 syscalls are really enabled, a Kconfig parameter to set its default value and a kernel parameter "syscall.x32" to change it at boot time. |
Ben Hutchings <ben@decadent.org.uk> | yes | debian | 2018-02-12 | |
| bugfix/all/disable-some-marvell-phys.patch | phy/marvell: disable 4-port phys The Marvell PHY was originally disabled because it can cause networking failures on some systems. According to Lennert Buytenhek this is because some of the variants added did not share the same register layout. Since the known cases are all 4-ports disable those variants (indicated by a 4 in the penultimate position of the model name) until they can be audited for correctness. [bwh: Also #if-out the init functions for these PHYs to avoid compiler warnings] |
Ian Campbell <ijc@hellion.org.uk> | yes | debian | 2013-11-20 | |
| bugfix/all/fs-add-module_softdep-declarations-for-hard-coded-cr.patch | fs: Add MODULE_SOFTDEP declarations for hard-coded crypto drivers This helps initramfs builders and other tools to find the full dependencies of a module. [Lukas Wunner: Forward-ported to 4.11: drop parts applied upstream] |
Ben Hutchings <ben@decadent.org.uk> | yes | debian | 2016-04-13 | |
| bugfix/all/documentation-use-relative-source-paths-in-abi-documentation.patch | Documentation: Use relative source filenames in ABI documentation Currently the ABI documentation files contain absolute source filenames, which makes them unreproducible if the build directory can vary. Remove the source base directory ($srctree) from the source filenames shown in the documentation. |
Ben Hutchings <benh@debian.org> | no | 2024-09-16 | ||
| bugfix/all/Revert-mmc-dw_mmc-Fix-IDMAC-operation-with-pages-big.patch | [PATCH] Revert "mmc: dw_mmc: Fix IDMAC operation with pages bigger than 4K" This reverts commit 8396c793ffdf28bb8aee7cfe0891080f8cab7890. |
Aurelien Jarno <aurelien@aurel32.net> | no | 2024-10-23 | ||
| features/all/lockdown/efi-add-an-efi_secure_boot-flag-to-indicate-secure-b.patch | [28/30] efi: Add an EFI_SECURE_BOOT flag to indicate secure boot mode UEFI machines can be booted in Secure Boot mode. Add an EFI_SECURE_BOOT flag that can be passed to efi_enabled() to find out whether secure boot is enabled. Move the switch-statement in x86's setup_arch() that inteprets the secure_boot boot parameter to generic code and set the bit there. [rperier: Forward-ported to 5.5: - Use pr_warn() - Adjust context] [bwh: Forward-ported to 5.6: adjust context] [bwh: Forward-ported to 5.7: - Use the next available bit in efi.flags - Adjust context] |
David Howells <dhowells@redhat.com> | no | https://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs.git/commit?id=a5d70c55c603233c192b375f72116a395909da28 | 2019-02-18 | |
| features/all/lockdown/efi-lock-down-the-kernel-if-booted-in-secure-boot-mo.patch | efi: Lock down the kernel if booted in secure boot mode Based on an earlier patch by David Howells, who wrote the following description: > UEFI Secure Boot provides a mechanism for ensuring that the firmware will > only load signed bootloaders and kernels. Certain use cases may also > require that all kernel modules also be signed. Add a configuration option > that to lock down the kernel - which includes requiring validly signed > modules - if the kernel is secure-booted. [Salvatore Bonaccorso: After fixing https://bugs.debian.org/956197 the help text for LOCK_DOWN_IN_EFI_SECURE_BOOT was adjusted to mention that lockdown is triggered in integrity mode (https://bugs.debian.org/1025417)] |
Ben Hutchings <ben@decadent.org.uk> | no | 2019-09-10 | ||
| features/all/lockdown/mtd-disable-slram-and-phram-when-locked-down.patch | mtd: phram,slram: Disable when the kernel is locked down These drivers allow mapping arbitrary memory ranges as MTD devices. This should be disabled to preserve the kernel's integrity when it is locked down. * Add the HWPARAM flag to the module parameters * When slram is built-in, it uses __setup() to read kernel parameters, so add an explicit check security_locked_down() check |
Ben Hutchings <ben@decadent.org.uk> | yes | 2019-08-30 | ||
| features/all/lockdown/arm64-add-kernel-config-option-to-lock-down-when.patch | arm64: add kernel config option to lock down when in Secure Boot mode Add a kernel configuration option to lock down the kernel, to restrict userspace's ability to modify the running kernel when UEFI Secure Boot is enabled. Based on the x86 patch by Matthew Garrett. Determine the state of Secure Boot in the EFI stub and pass this to the kernel using the FDT. [bwh: Forward-ported to 4.10: adjust context] [Lukas Wunner: Forward-ported to 4.11: drop parts applied upstream] [bwh: Forward-ported to 4.15 and lockdown patch set: - Pass result of efi_get_secureboot() in stub through to efi_set_secure_boot() in main kernel - Use lockdown API and naming] [bwh: Forward-ported to 4.19.3: adjust context in update_fdt()] [dannf: Moved init_lockdown() call after uefi_init(), fixing SB detection] [bwh: Drop call to init_lockdown(), as efi_set_secure_boot() now calls this] [bwh: Forward-ported to 5.6: efi_get_secureboot() no longer takes a sys_table parameter] [bwh: Forward-ported to 5.7: EFI initialisation from FDT was rewritten, so: - Add Secure Boot mode to the parameter enumeration in fdtparams.c - Add a parameter to efi_get_fdt_params() to return the Secure Boot mode - Since Xen does not have a property name defined for Secure Boot mode, change efi_get_fdt_prop() to handle a missing property name by clearing the output variable] [Salvatore Bonaccorso: Forward-ported to 5.10: f30f242fb131 ("efi: Rename arm-init to efi-init common for all arch") renamed arm-init.c to efi-init.c] |
Linn Crosetto <linn@hpe.com> | no | debian | 2016-08-30 | |
| features/all/db-mok-keyring/0003-MODSIGN-checking-the-blacklisted-hash-before-loading-a-kernel-module.patch | [PATCH 3/4] MODSIGN: checking the blacklisted hash before loading a kernel module This patch adds the logic for checking the kernel module's hash base on blacklist. The hash must be generated by sha256 and enrolled to dbx/mokx. For example: sha256sum sample.ko mokutil --mokx --import-hash $HASH_RESULT Whether the signature on ko file is stripped or not, the hash can be compared by kernel. [Rebased by Luca Boccassi] [bwh: Forward-ported to 5.19: - The type parameter to is_hash_blacklisted() is now an enumeration rather than a string - Adjust filename, context] |
"Lee, Chun-Yi" <joeyli.kernel@gmail.com> | no | https://lore.kernel.org/patchwork/patch/933175/ | 2018-03-13 | |
| features/all/db-mok-keyring/KEYS-Make-use-of-platform-keyring-for-module-signature.patch | [PATCH] KEYS: Make use of platform keyring for module signature verify This allows a cert in DB to be used to sign modules, in addition to certs in the MoK and built-in keyrings. [bwh: Forward-ported to 5.19: adjust filename] [наб: reinstate for 6.1, re-write description] |
Robert Holmes <robeholmes@gmail.com> | yes | debian | https://src.fedoraproject.org/rpms/kernel/raw/master/f/KEYS-Make-use-of-platform-keyring-for-module-signature.patch | 2019-04-23 |
| features/all/db-mok-keyring/trust-machine-keyring-by-default.patch | [PATCH] trust machine keyring (MoK) by default Debian always trusted keys in MoK by default. Upstream made it conditional on a new EFI variable being set. To keep backward compatibility skip this check. |
Luca Boccassi <bluca@debian.org> | not-needed | 2022-10-14 | ||
| bugfix/all/module-disable-matching-missing-version-crc.patch | module: Disable matching missing version CRC This partly reverts commit cd3caefb4663e3811d37cc2afad3cce642d60061. We want to fail closed if a symbol version CRC is missing, as the alternative may allow subverting module signing. |
Ben Hutchings <ben@decadent.org.uk> | not-needed | 2016-12-02 | ||
| bugfix/all/usbip-document-tcp-wrappers.patch | usbip: Document TCP wrappers Add references to TCP wrappers configuration in the manual page. |
Ben Hutchings <ben@decadent.org.uk> | no | 2012-06-24 | ||
| bugfix/all/kbuild-fix-recordmcount-dependency.patch | kbuild: Fix recordmcount dependency for OOT modules We never rebuild anything in-tree when building an out-of-tree modules, so external modules should not depend on the recordmcount sources. |
Ben Hutchings <ben@decadent.org.uk> | no | 2014-09-08 | ||
| bugfix/all/tools-perf-remove-shebangs.patch | tools/perf: Remove shebang lines from perf scripts perf scripts need to be invoked through perf, not directly through perl (or other language interpreter). So including shebang lines in them is useless and possibly misleading. |
Ben Hutchings <ben@decadent.org.uk> | no | 2015-09-25 | ||
| bugfix/x86/revert-perf-build-fix-libunwind-feature-detection-on.patch | Revert "perf build: Fix libunwind feature detection on 32-bit x86" This reverts commit 05b41775e2edd69a83f592e3534930c934d4038e. It broke feature detection that was working just fine for us. |
Ben Hutchings <ben@decadent.org.uk> | no | 2015-09-25 | ||
| bugfix/all/tools-build-remove-bpf-run-time-check-at-build-time.patch | tools/build: Remove bpf() run-time check at build time It is not correct to test that a syscall works on the build system's kernel. We might be building on an earlier kernel version or with security restrictions that block bpf(). |
Ben Hutchings <ben@decadent.org.uk> | no | 2016-02-21 | ||
| bugfix/all/cpupower-fix-checks-for-cpu-existence.patch | cpupower: Fix checks for CPU existence Calls to cpufreq_cpu_exists(cpu) were converted to cpupower_is_cpu_online(cpu) when libcpupower was introduced and the former function was deleted. However, cpupower_is_cpu_online() does not distinguish physically absent and offline CPUs, and does not set errno. cpufreq-set has already been fixed (commit c25badc9ceb6). In cpufreq-bench, which prints an error message for offline CPUs, properly distinguish and report the zero and negative cases. [carnil: Update/Refresh patch for 4.14.17: The issue with the incorrect check has been fixed with upstream commit 53d1cd6b125f. Keep in the patch the distinction and report for the zero and negative cases.] |
Ben Hutchings <ben@decadent.org.uk> | yes | 2016-11-03 | ||
| bugfix/all/libapi-define-_fortify_source-as-2-not-empty.patch | libapi: Define _FORTIFY_SOURCE as 2, not empty | Ben Hutchings <benh@debian.org> | yes | 2022-01-15 | ||
| bugfix/all/tools-perf-fix-missing-ldflags-for-some-programs.patch | tools/perf: Fix missing LDFLAGS for some programs | Ben Hutchings <benh@debian.org> | no | 2022-01-15 | ||
| bugfix/all/tools_lib_symbol_use_d_fortify_source_2_for_non_debug_builds.patch | tools lib symbol: Use -D_FORTIFY_SOURCE=2 for non-debug builds Commit 160be157eaba ("tool lib symbol: Add Makefile/Build") failed to define _FORTIFY_SOURCE to 2, probabaly this was cut&pasted from other Makefiles with the same problem. |
Uwe Kleine-König <ukleinek@debian.org> | yes | 2023-04-24 | ||
| bugfix/all/perf-tools-support-extra-cxxflags.patch | perf tools: Support EXTRA_CXXFLAGS Add support for an EXTRA_CXXFLAGS variable, used similarly to EXTRA_CFLAGS. |
Ben Hutchings <benh@debian.org> | no | 2023-05-15 | ||
| bugfix/all/perf-tools-pass-extra_cflags-through-to-libbpf-build-again.patch | perf tools: Pass EXTRA_CFLAGS through to libbpf build again When perf was statically linked to libbpf, any definition of EXTRA_CFLAGS passed to Makefile.perf propagated to the sub-make of libbpf. Since commit 9dabf4003423 ("perf python: Switch module to linking libraries from building source"), EXTRA_CFLAGS is overridden to "-fPIC" for the sub-make. Change to include any user-provided EXTRA_CFLAGS before the "-fPIC" option. |
Ben Hutchings <benh@debian.org> | no | 2024-08-16 | ||
| bugfix/all/kbuild-bpf-fix-btf-reproducibility.patch | kbuild, bpf: Fix BTF reproducibility pahole 1.22 introduced the -j option for parallel processing, and kbuild uses it, but this makes its output unreproducible. pahole 1.27 introduced --btf_features=+reproducible_build which makes the output reproducible even when -j is used. Assume that if KBUILD_BUILD_TIMESTAMP is set then a reproducible build is required, and use both options if available or neither if not. |
Ben Hutchings <benh@debian.org> | no | 2024-09-16 | ||
| bugfix/powerpc/fbdev-offb-Update-expected-device-name.patch | fbdev/offb: Update expected device name Since commit 241d2fb56a18 ("of: Make OF framebuffer device names unique"), as spotted by Frédéric Bonnard, the historical "of-display" device is "of-display.N" as required. This means that offb no longer finds the expected device, which prevents the Debian Installer from setting up its interface, at least on ppc64el. It might be better to iterate on all possible nodes, but updating the hardcoded device from "of-display" to "of-display.0" is confirmed to fix the Debian Installer at the very least. |
Cyril Brulebois <cyril@debamax.com> | no | https://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev.git/commit?id=27c74ea74be805ccba1bc1a0a03cc79c51dca6ea | 2023-04-12 |