| Patch | Description | Author | Forwarded | Bugs | Origin | Last update |
|---|---|---|---|---|---|---|
| debian/gitignore.patch | Tweak gitignore for Debian pkg-kernel using git svn. [bwh: Tweak further for pure git] =================================================================== |
Ian Campbell <ijc@hellion.org.uk> | not-needed | 2013-01-17 | ||
| debian/dfsg/arch-powerpc-platforms-8xx-ucode-disable.patch | Remove microcode patches for mgsuvd (not enabled in Debian configs) diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig index 48a920a..81570b6 100644 |
Ben Hutchings <ben@decadent.org.uk> | not-needed | 2009-04-13 | ||
| debian/dfsg/drivers-media-dvb-dvb-usb-af9005-disable.patch | dvb-usb-af9005: mark as broken | Ben Hutchings <ben@decadent.org.uk> | not-needed | 2009-08-17 | ||
| debian/dfsg/vs6624-disable.patch | vs6624: mark as broken | Ben Hutchings <ben@decadent.org.uk> | not-needed | 2012-05-27 | ||
| debian/dfsg/drivers-net-appletalk-cops.patch | Add removal patches for: 3c359, smctr, keyspan, cops | Frederik Schüler <fs@debian.org> | not-needed | 2007-01-05 | ||
| debian/dfsg/video-remove-nvidiafb-and-rivafb.patch | video: Remove nvidiafb and rivafb These drivers contain register programming code provided by the hardware vendor that appears to have been deliberately obfuscated. This is arguably not the preferred form for modification. These drivers are also largely redundant with nouveau. The RIVA 128 (NV3) is not supported by nouveau but is about 15 years old and probably discontinued 10 years ago. |
Ben Hutchings <ben@decadent.org.uk> | no | debian | 2012-06-02 | |
| debian/dfsg/documentation-fix-broken-link-to-cipso-draft.patch | Documentation: Fix broken link to CIPSO draft We exclude the CIPSO draft text as its licence is not DFSG compliant. Link to the IETF's online version instead. |
Ben Hutchings <ben@decadent.org.uk> | not-needed | 2019-08-24 | ||
| debian/version.patch | Include package version along with kernel release in stack traces For distribution binary packages we assume $DISTRIBUTION_OFFICIAL_BUILD, $DISTRIBUTOR and $DISTRIBUTION_VERSION are set. |
Ben Hutchings <ben@decadent.org.uk> | not-needed | 2012-07-24 | ||
| debian/uname-version-timestamp.patch | Make mkcompile_h accept an alternate timestamp string We want to include the Debian version in the utsname::version string instead of a full timestamp string. However, we still need to provide a standard timestamp string for gen_initramfs_list.sh to make the kernel image reproducible. Make mkcompile_h use $KBUILD_BUILD_VERSION_TIMESTAMP in preference to $KBUILD_BUILD_TIMESTAMP. =================================================================== |
Ben Hutchings <ben@decadent.org.uk> | not-needed | 2015-05-12 | ||
| debian/kernelvariables.patch | kbuild: Make the toolchain variables easily overwritable Allow make variables to be overridden for each flavour by a file in the build tree, .kernelvariables. We currently use this for ARCH, KERNELRELEASE, CC, and in some cases also CROSS_COMPILE, KCFLAGS. This file can only be read after we establish the build tree, and all use of $(ARCH) needs to be moved after this. [bwh: Updated for 5.3: include .kernelvariables from current directory rather than using undefined $(obj).] |
Bastian Blank <waldi@debian.org> | not-needed | 2009-02-22 | ||
| debian/ia64-hardcode-arch-script-output.patch | Hardcode arch script output Here's a patch that simply uses hardcoded definitions instead of doing the dynamic tests that require architecture-specific scripts. I don't particularly like this approach because it restricts portability and diverts from upstream. But, it is simpler, and this really needs to be fixed somehow before etch (along with a rebuild of linux-modules-extra-2.6), so I'm willing to live with it if my other patch is deemed unacceptable. My primary concern is that, in the future, the output of these scripts will change and we (or our successors) will either not notice or forget to update the hardcoded values. Including the scripts in linux-kbuild will avoid this manual step altogether, and allow for the possibility of other archs to provide their own scripts in the future. |
dann frazier <dannf@debian.org> | not-needed | debian | 2007-03-26 | |
| debian/mips-disable-werror.patch | [PATCH] Partially revert "MIPS: Add -Werror to arch/mips/Kbuild" This reverts commits 66f9ba101f54bda63ab1db97f9e9e94763d0651b and 5373633cc9253ba82547473e899cab141c54133e. We really don't want to add -Werror anywhere. |
Ben Hutchings <ben@decadent.org.uk> | not-needed | 2010-09-13 | ||
| debian/mips-boston-disable-its.patch | Disable uImage generation for mips generic MIPS generic trys to generate uImage when build, which then ask for u-boot-tools. [bwh: Updated for 5.17: - zload-y is no longer assigned here and appears to default to empty - Adjust context] |
YunQiang Su <syq@debian.org> | not-needed | 2018-05-14 | ||
| debian/mips-ieee754-relaxed.patch | Use RELAXED ieee754 mode for Loongson-3 as 3A 4000 is 2008-only There are 2 mode of value of IEEE NaN hardcoded by CPU. Currently, our mipsel/mips64el port is in so-called lagacy mode. Loongson 3A 4000 is set as the so-called 2008 mode. To make Debian workable on Loongson 3A 4000, we need set the kerenl in RELAXED mode. https://web.archive.org/web/20180830093617/https://dmz-portal.mips.com/wiki/MIPS_ABI_-_NaN_Interlinking diff --git a/arch/mips/kernel/fpu-probe.c b/arch/mips/kernel/fpu-probe.c index e689d6a83..667226f94 100644 |
YunQiang Su <syq@debian.org> | not-needed | 2020-11-16 | ||
| debian/arch-sh4-fix-uimage-build.patch | [sh4] Fix uImage build [bwh: This was added without a description, but I think it is done only to avoid a build-dependency on u-boot-tools.] |
Nobuhiro Iwamatsu <iwamatsu@nigauri.org> | not-needed | debian | ||
| debian/tools-perf-perf-read-vdso-in-libexec.patch | linux-tools: Install perf-read-vdso{,x}32 in directory under /usr/lib | Ben Hutchings <benh@debian.org> | no | 2015-05-11 | ||
| debian/tools-perf-install-python-bindings.patch | tools: install perf python bindings | Adriaan Schmidt <adriaan.schmidt@siemens.com> | not-needed | debian | 2022-04-04 | |
| debian/wireless-add-debian-wireless-regdb-certificates.patch | wireless: Add Debian wireless-regdb certificates This hex dump is generated using: { for cert in debian/certs/wireless-regdb-*.pem; do openssl x509 -in $cert -outform der; done } | hexdump -v -e '1/1 "0x%.2x," "\n"' > net/wireless/certs/debian.hex |
Ben Hutchings <ben@decadent.org.uk> | not-needed | 2018-04-13 | ||
| debian/export-symbols-needed-by-android-drivers.patch | Export symbols needed by Android drivers We want to enable use of the Android ashmem and binder drivers to support Anbox, but they should not be built-in as that would waste resources and increase security attack surface on systems that don't need them. Export the currently un-exported symbols they depend on. |
Ben Hutchings <ben@decadent.org.uk> | no | debian | 2020-09-07 | |
| debian/android-enable-building-ashmem-and-binder-as-modules.patch | android: Enable building ashmem and binder as modules We want to enable use of the Android ashmem and binder drivers to support Anbox, but they should not be built-in as that would waste resources and increase security attack surface on systems that don't need them. - Add a MODULE_LICENSE declaration to ashmem - Change the Makefiles to build each driver as an object with the "_linux" suffix (which is what Anbox expects) - Change config symbol types to tristate Update: In upstream commit 721412ed3d titled "staging: remove ashmem" the ashmem driver was removed entirely. Secondary commit message: "The mainline replacement for ashmem is memfd, so remove the legacy code from drivers/staging/" Consequently, the ashmem part of this patch has been removed. |
Ben Hutchings <ben@decadent.org.uk> | no | debian | 2018-06-22 | |
| debian/documentation-drop-sphinx-version-check.patch | [PATCH 1/2] Documentation: Drop sphinx version check | Bastian Blank <waldi@debian.org> | not-needed | 2020-08-04 | ||
| debian/perf-traceevent-support-asciidoctor-for-documentatio.patch | [PATCH 2/2] perf/traceevent: Support asciidoctor for documentation | Bastian Blank <waldi@debian.org> | not-needed | 2020-08-04 | ||
| debian/kbuild-look-for-module.lds-under-arch-directory-too.patch | kbuild: Look for module.lds under arch directory too The module.lds linker script is now built under the scripts directory, where previously it was under arch/$(SRCARCH). However, we package the scripts directory as linux-kbuild, which is meant to be able to do support native and cross-builds. That means it shouldn't contain files for a specific target architecture without a wrapper to select between them, and it doesn't appear that linker scripts are powerful enough to implement such a wrapper. Building module.lds in a different location would require relatively large changes. Moving it in the package build rules can work, but we need to support custom kernel builds from the same source so we can't assume it's moved. Therefore, we move module.lds under the arch build directory in rules.real and change Makefile.modfinal to look for it in both places. |
Ben Hutchings <benh@debian.org> | not-needed | debian | 2020-12-10 | |
| debian/kbuild-abort-build-if-subdirs-used.patch | kbuild: Abort build if SUBDIRS used DKMS and module-assistant both build OOT modules as root. If they build an old OOT module that still use SUBDIRS this causes Kbuild to try building a full kernel, which obviously fails but not before deleting files from the installed headers package. To avoid such mishaps, detect this situation and abort the build. The error message is based on that used in commit 0126be38d988 "kbuild: announce removal of SUBDIRS if used". |
Ben Hutchings <benh@debian.org> | not-needed | debian | 2021-04-26 | |
| debian/module-avoid-abi-changes-when-debug-info-is-disabled.patch | module: Avoid ABI changes when debug info is disabled CI builds are done with debug info disabled, but this removes some members from struct module. This causes builds to fail if there is an ABI reference for the current ABI. Define these members unconditionally, so that there is no ABI change. |
Ben Hutchings <benh@debian.org> | not-needed | 2022-05-13 | ||
| debian/makefile-make-compiler-version-comparison-optional.patch | Makefile: Make compiler version comparison optional The top-level Makefile warns if the compiler version string changes at all between the kernel build and an out-of-tree module build. We expect that major compiler version changes could introduce ABI changes, and override the CC variable in out-of-tree module builds to ensure that the same major compiler version is used. But minor version changes should not make a difference, so this exact version comparison produces false warnings. Since custom kernel packages don't have that, don't remove the version comparison. Instead, skip it if $(DEBIAN_KERNEL_NO_CC_VERSION_CHECK) is non-empty. |
Ben Hutchings <benh@debian.org> | not-needed | debian | 2022-09-15 | |
| features/all/drivers-media-dvb-usb-af9005-request_firmware.patch | af9005: Use request_firmware() to load register init script Read the register init script from the Windows driver. This is sick but should avoid the potential copyright infringement in distributing a version of the script which is directly derived from the driver. |
Ben Hutchings <ben@decadent.org.uk> | no | 2009-08-24 | ||
| debian/iwlwifi-do-not-request-unreleased-firmware.patch | iwlwifi: Do not request unreleased firmware for IWL6000 The iwlwifi driver currently supports firmware API versions 4-6 for these devices. It will request the file for the latest supported version and then fall back to earlier versions. However, the latest version that has actually been released is 4, so we expect the requests for versions 6 and then 5 to fail. The installer appears to report any failed request, and it is probably not easy to detect that this particular failure is harmless. So stop requesting the unreleased firmware. |
Ben Hutchings <ben@decadent.org.uk> | not-needed | debian | ||
| bugfix/all/firmware_class-log-every-success-and-failure.patch | firmware_class: Log every success and failure against given device The hundreds of users of request_firmware() have nearly as many different log formats for reporting failures. They also have only the vaguest hint as to what went wrong; only firmware_class really knows that. Therefore, add specific log messages for the failure modes that aren't currently logged. In case of a driver that tries multiple names, this may result in the impression that it failed to initialise. Therefore, also log successes. This makes many error messages in drivers redundant, which will be removed in later patches. This does not cover the case where we fall back to a user-mode helper (which is no longer enabled in Debian). format to detect missing firmware. |
Ben Hutchings <ben@decadent.org.uk> | no | 2012-12-09 | ||
| bugfix/all/firmware-remove-redundant-log-messages-from-drivers.patch | firmware: Remove redundant log messages from drivers Now that firmware_class logs every success and failure consistently, many other log messages can be removed from drivers. This will probably need to be split up into multiple patches prior to upstream submission. |
Ben Hutchings <ben@decadent.org.uk> | no | 2012-12-09 | ||
| bugfix/all/radeon-amdgpu-firmware-is-required-for-drm-and-kms-on-r600-onward.patch | radeon, amdgpu: Firmware is required for DRM and KMS on R600 onward radeon requires firmware/microcode for the GPU in all chips, but for newer chips (apparently R600 'Evergreen' onward) it also expects firmware for the memory controller and other sub-blocks. radeon attempts to gracefully fall back and disable some features if the firmware is not available, but becomes unstable - the framebuffer and/or system memory may be corrupted, or the display may stay black. Therefore, perform a basic check for the existence of /lib/firmware/{radeon,amdgpu} when a device is probed, and abort if it is missing, except for the pre-R600 case. |
Ben Hutchings <ben@decadent.org.uk> | no | debian | 2013-01-08 | |
| debian/firmware_class-refer-to-debian-wiki-firmware-page.patch | firmware_class: Refer to Debian wiki page when logging missing firmware If firmware loading fails due to a missing file, log a second error message referring to our wiki page about firmware. This will explain why some firmware is in non-free, or can't be packaged at all. Only do this once per boot. Do something similar in the radeon and amdgpu drivers, where we have an early check to avoid failing at a point where we cannot display anything. |
Ben Hutchings <ben@decadent.org.uk> | not-needed | debian | 2018-03-12 | |
| features/arm/arm-dts-bcm-Enable-device-tree-overlay-support-for-R.patch | [PATCH] arm: dts: bcm: Enable device-tree overlay support for RPi devices Add the '-@' DTC option for the Raspberry Pi devices. This option populates the '__symbols__' node that contains all the necessary symbols for supporting device-tree overlays (for instance from the firmware or the bootloader) on these devices. The Rasbperry Pi devices are well known for their GPIO header, that allow various "HATs" or other modules do be connected and this enables users to create out-of-tree device-tree overlays for these modules. Please note that this change does increase the size of the resulting DTB by ~40%. For example, with v6.4-rc1 increase in size is as follows: bcm2711-rpi-400.dtb 27556 -> 38141 bytes bcm2711-rpi-4-b.dtb 27484 -> 38069 bytes bcm2711-rpi-cm4-io.dtb 27373 -> 38076 bytes bcm2835-rpi-a.dtb 12879 -> 18235 bytes bcm2835-rpi-a-plus.dtb 13015 -> 18371 bytes bcm2835-rpi-b.dtb 12997 -> 18377 bytes bcm2835-rpi-b-plus.dtb 13237 -> 18666 bytes bcm2835-rpi-b-rev2.dtb 13085 -> 18514 bytes bcm2835-rpi-cm1-io1.dtb 13109 -> 18528 bytes bcm2835-rpi-zero.dtb 12923 -> 18311 bytes bcm2835-rpi-zero-w.dtb 13449 -> 18889 bytes bcm2836-rpi-2-b.dtb 14500 -> 20252 bytes bcm2837-rpi-3-a-plus.dtb 14930 -> 20713 bytes bcm2837-rpi-3-b.dtb 15107 -> 20979 bytes bcm2837-rpi-3-b-plus.dtb 15463 -> 21443 bytes bcm2837-rpi-cm3-io3.dtb 14429 -> 20098 bytes bcm2837-rpi-zero-2-w.dtb 14781 -> 20524 bytes [ukleinek: rebased to v6.4-rc1] |
Aurelien Jarno <aurelien@aurel32.net> | no | https://git.kernel.org/linus/e925743edc0d86fb846d952190d005bac8a6e373 | 2023-05-30 | |
| debian/af_802154-Disable-auto-loading-as-mitigation-against.patch | [PATCH 2/3] af_802154: Disable auto-loading as mitigation against local exploits Recent review has revealed several bugs in obscure protocol implementations that can be exploited by local users for denial of service or privilege escalation. We can mitigate the effect of any remaining vulnerabilities in such protocols by preventing unprivileged users from loading the modules, so that they are only exploitable on systems where the administrator has chosen to load the protocol. The 'af_802154' (IEEE 802.15.4) protocol is not widely used, was not present in the 'lenny' kernel, and seems to receive only sporadic maintenance. Therefore disable auto-loading. |
Ben Hutchings <ben@decadent.org.uk> | not-needed | 2010-11-19 | ||
| debian/rds-Disable-auto-loading-as-mitigation-against-local.patch | [PATCH 1/3] rds: Disable auto-loading as mitigation against local exploits Recent review has revealed several bugs in obscure protocol implementations that can be exploited by local users for denial of service or privilege escalation. We can mitigate the effect of any remaining vulnerabilities in such protocols by preventing unprivileged users from loading the modules, so that they are only exploitable on systems where the administrator has chosen to load the protocol. The 'rds' protocol is one such protocol that has been found to be vulnerable, and which was not present in the 'lenny' kernel. Therefore disable auto-loading. |
Ben Hutchings <ben@decadent.org.uk> | not-needed | 2010-11-19 | ||
| debian/dccp-disable-auto-loading-as-mitigation-against-local-exploits.patch | dccp: Disable auto-loading as mitigation against local exploits We can mitigate the effect of vulnerabilities in obscure protocols by preventing unprivileged users from loading the modules, so that they are only exploitable on systems where the administrator has chosen to load the protocol. The 'dccp' protocol is not actively maintained or widely used. Therefore disable auto-loading. |
Ben Hutchings <ben@decadent.org.uk> | not-needed | 2017-02-16 | ||
| debian/hamradio-disable-auto-loading-as-mitigation-against-local-exploits.patch | hamradio: Disable auto-loading as mitigation against local exploits We can mitigate the effect of vulnerabilities in obscure protocols by preventing unprivileged users from loading the modules, so that they are only exploitable on systems where the administrator has chosen to load the protocol. The 'ham' radio protocols (ax25, netrom, rose) are not actively maintained or widely used. Therefore disable auto-loading. |
Ben Hutchings <ben@decadent.org.uk> | not-needed | 2019-08-05 | ||
| debian/fs-enable-link-security-restrictions-by-default.patch | fs: Enable link security restrictions by default This reverts commit 561ec64ae67ef25cac8d72bb9c4bfc955edfd415 ('VFS: don't do protected {sym,hard}links by default'). |
Ben Hutchings <ben@decadent.org.uk> | not-needed | debian | 2012-11-02 | |
| debian/sched-autogroup-disabled.patch | sched: Do not enable autogrouping by default We want to provide the option of autogrouping but without enabling it by default yet. |
Ben Hutchings <ben@decadent.org.uk> | not-needed | 2011-03-16 | ||
| debian/yama-disable-by-default.patch | yama: Disable by default | Ben Hutchings <ben@decadent.org.uk> | not-needed | debian | 2013-06-19 | |
| debian/add-sysctl-to-disallow-unprivileged-CLONE_NEWUSER-by-default.patch | add sysctl to disallow unprivileged CLONE_NEWUSER by default add sysctl to disallow unprivileged CLONE_NEWUSER by default This is a short-term patch. Unprivileged use of CLONE_NEWUSER is certainly an intended feature of user namespaces. However for at least saucy we want to make sure that, if any security issues are found, we have a fail-safe. [bwh: Remove unneeded binary sysctl bits] [bwh: Keep this sysctl, but change the default to enabled] |
Serge Hallyn <serge.hallyn@canonical.com> | no | http://kernel.ubuntu.com/git?p=serge%2Fubuntu-saucy.git;a=commit;h=5c847404dcb2e3195ad0057877e1422ae90892b8 | 2013-05-31 | |
| features/all/security-perf-allow-further-restriction-of-perf_event_open.patch | security,perf: Allow further restriction of perf_event_open When kernel.perf_event_open is set to 3 (or greater), disallow all access to performance events by users without CAP_SYS_ADMIN. Add a Kconfig symbol CONFIG_SECURITY_PERF_EVENTS_RESTRICT that makes this value the default. This is based on a similar feature in grsecurity (CONFIG_GRKERNSEC_PERF_HARDEN). This version doesn't include making the variable read-only. It also allows enabling further restriction at run-time regardless of whether the default is changed. |
Ben Hutchings <ben@decadent.org.uk> | yes | 2016-01-11 | ||
| features/x86/intel-iommu-add-option-to-exclude-integrated-gpu-only.patch | intel-iommu: Add option to exclude integrated GPU only There is still laptop firmware that touches the integrated GPU behind the operating system's back, and doesn't say so in the RMRR table. Enabling the IOMMU for all devices causes breakage, but turning it off for all graphics devices seems like a major weakness. Add an option, intel_iommu=intgpu_off, to exclude only integrated GPUs from remapping. This is a narrower exclusion than igfx_off: it only affects Intel devices on the root bus. Devices attached through an external port (Thunderbolt or ExpressCard) won't be on the root bus. |
Ben Hutchings <ben@decadent.org.uk> | no | debian | 2019-08-21 | |
| features/x86/intel-iommu-add-kconfig-option-to-exclude-igpu-by-default.patch | intel-iommu: Add Kconfig option to exclude iGPU by default There is still laptop firmware that touches the integrated GPU behind the operating system's back, and doesn't say so in the RMRR table. Enabling the IOMMU for all devices causes breakage. Replace CONFIG_INTEL_IOMMU_DEFAULT_ON with a 3-way choice corresponding to "on", "off", and "on,intgpu_off". |
Ben Hutchings <ben@decadent.org.uk> | no | debian | 2019-08-21 | |
| debian/cdc_ncm-cdc_mbim-use-ncm-by-default.patch | cdc_ncm,cdc_mbim: Use NCM by default Devices that support both NCM and MBIM modes should be kept in NCM mode unless there is userland support for MBIM. Set the default value of cdc_ncm.prefer_mbim to false and leave it to userland (modem-manager) to override this with a modprobe.conf file once it's ready to speak MBIM. |
Ben Hutchings <ben@decadent.org.uk> | not-needed | 2013-03-31 | ||
| debian/snd-pcsp-disable-autoload.patch | snd-pcsp: Disable autoload There are two drivers claiming the platform:pcspkr device: - pcspkr creates an input(!) device that can only beep - snd-pcsp creates an equivalent input device plus a PCM device that can play barely recognisable renditions of sampled sound snd-pcsp is blacklisted by the alsa-base package, but not everyone installs that. On PCs where no sound is wanted at all, both drivers will still be loaded and one or other will complain that it couldn't claim the relevant I/O range. In case anyone finds snd-pcsp useful, we continue to build it. But remove the alias, to ensure it's not loaded where it's not wanted. |
Ben Hutchings <ben@decadent.org.uk> | not-needed | debian | 2014-02-05 | |
| bugfix/x86/viafb-autoload-on-olpc-xo1.5-only.patch | viafb: Autoload on OLPC XO 1.5 only It appears that viafb won't work automatically on all the boards for which it has a PCI device ID match. Currently, it is blacklisted by udev along with most other framebuffer drivers, so this doesn't matter much. However, this driver is required for console support on the XO 1.5. We need to allow it to be autoloaded on this model only, and then un-blacklist it in udev. |
Ben Hutchings <ben@decadent.org.uk> | no | debian | 2013-04-20 | |
| debian/fjes-disable-autoload.patch | fjes: Disable auto-loading fjes matches a generic ACPI device ID, and relies on its probe function to distinguish whether that really corresponds to a supported device. Very few system will need the driver and it wastes memory on all the other systems where the same device ID appears, so disable auto-loading. |
Ben Hutchings <ben@decadent.org.uk> | no | debian | 2017-03-18 | |
| debian/fanotify-taint-on-use-of-fanotify_access_permissions.patch | fanotify: Taint on use of FANOTIFY_ACCESS_PERMISSIONS Various free and proprietary AV products use this feature and users apparently want it. But punting access checks to userland seems like an easy way to deadlock the system, and there will be nothing we can do about that. So warn and taint the kernel if this feature is actually used. |
Ben Hutchings <ben@decadent.org.uk> | not-needed | 2016-07-13 | ||
| debian/btrfs-warn-about-raid5-6-being-experimental-at-mount.patch | btrfs: warn about RAID5/6 being experimental at mount time Too many people come complaining about losing their data -- and indeed, there's no warning outside a wiki and the mailing list tribal knowledge. Message severity chosen for consistency with XFS -- "alert" makes dmesg produce nice red background which should get the point across. [bwh: Also add_taint() so this is flagged in bug reports] |
Adam Borowski <kilobyte@angband.pl> | no | debian | https://bugs.debian.org/863290#5 | 2017-03-28 |
| bugfix/arm/arm-dts-kirkwood-fix-sata-pinmux-ing-for-ts419.patch | ARM: dts: kirkwood: Fix SATA pinmux-ing for TS419 The old board code for the TS419 assigns MPP pins 15 and 16 as SATA activity signals (and none as SATA presence signals). Currently the device tree assigns the SoC's default pinmux groups for SATA, which conflict with the second Ethernet port. |
Ben Hutchings <ben@decadent.org.uk> | yes | debian | 2017-02-17 | |
| bugfix/x86/perf-tools-fix-unwind-build-on-i386.patch | perf tools: Fix unwind build on i386 EINVAL may not be defined when building unwind-libunwind.c with REMOTE_UNWIND_LIBUNWIND, resulting in a compiler error in LIBUNWIND__ARCH_REG_ID(). Its only caller, access_reg(), only checks for a negative return value and doesn't care what it is. So change -EINVAL to -1. |
Ben Hutchings <ben@decadent.org.uk> | no | 2017-07-22 | ||
| bugfix/sh/sh-boot-do-not-use-hyphen-in-exported-variable-name.patch | sh: Do not use hyphen in exported variable names arch/sh/Makefile defines and exports ld-bfd to be used by arch/sh/boot/Makefile and arch/sh/boot/compressed/Makefile. However some shells, including dash, will not pass through environment variables whose name includes a hyphen. Usually GNU make does not use a shell to recurse, but if e.g. $(srctree) contains '~' it will use a shell here. Rename the variable to ld_bfd. (Another instance of this problem was fixed upstream by commit 82977af93a0d "sh: rename suffix-y to suffix_y".) |
Ben Hutchings <ben@decadent.org.uk> | no | 2022-02-07 | ||
| bugfix/arm/arm-mm-export-__sync_icache_dcache-for-xen-privcmd.patch | ARM: mm: Export __sync_icache_dcache() for xen-privcmd The xen-privcmd driver, which can be modular, calls set_pte_at() which in turn may call __sync_icache_dcache(). The call to __sync_icache_dcache() may be optimised out because it is conditional on !pte_special(), and xen-privcmd calls pte_mkspecial(). However, in a non-LPAE configuration there is no "special" bit and the call is really unconditional. |
Ben Hutchings <ben@decadent.org.uk> | yes | 2018-07-11 | ||
| bugfix/powerpc/powerpc-boot-fix-missing-crc32poly.h-when-building-with-kernel_xz.patch | powerpc/boot: Fix missing crc32poly.h when building with KERNEL_XZ After commit faa16bc404d7 ("lib: Use existing define with polynomial") the lib/xz/xz_crc32.c includes a header from include/linux directory thus any other user of this code should define proper include path. This fixes the build error on powerpc with CONFIG_KERNEL_XZ: In file included from ../arch/powerpc/boot/../../../lib/decompress_unxz.c:233:0, from ../arch/powerpc/boot/decompress.c:42: ../arch/powerpc/boot/../../../lib/xz/xz_crc32.c:18:29: fatal error: linux/crc32poly.h: No such file or directory |
Krzysztof Kozlowski <krzk@kernel.org> | no | https://patchwork.ozlabs.org/patch/963258/ | 2018-08-29 | |
| bugfix/arm64/arm64-acpi-Add-fixup-for-HPE-m400-quirks.patch | arm64/acpi: Add fixup for HPE m400 quirks Adds a new ACPI init routine acpi_fixup_m400_quirks that adds a work-around for HPE ProLiant m400 APEI firmware problems. The work-around disables APEI when CONFIG_ACPI_APEI is set and m400 firmware is detected. Without this fixup m400 systems experience errors like these on startup: [Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 2 [Hardware Error]: event severity: fatal [Hardware Error]: Error 0, type: fatal [Hardware Error]: section_type: memory error [Hardware Error]: error_status: 0x0000000000001300 [Hardware Error]: error_type: 10, invalid address Kernel panic - not syncing: Fatal hardware error! [bwh: Adjust context to apply to Linux 4.19] |
Geoff Levand <geoff@infradead.org> | yes | 2018-06-13 | ||
| bugfix/alpha/alpha-fix-missing-symbol-versions-for-str-n-cat-cpy.patch | alpha: Fix missing symbol versions for str{,n}{cat,cpy} Now that modpost extracts symbol versions from *.cmd files, it can't find the versions for these 4 symbols. This is due to the way we link their objects together ahead of the full vmlinux link. genksyms puts their symbol CRCs in .str{,n}{cat,cpy}.o.cmd, but modpost only reads the .sty{,n}cpy.o.cmd files. Add assembly sources that bring the appropriate routines together with include directives instead of using the linker for this. |
Ben Hutchings <ben@decadent.org.uk> | no | https://marc.info/?l=linux-alpha&m=167364720725291&w=2 | 2023-01-05 | |
| features/arm64/dt-bindings-rockchip-Add-Hardkernel-ODROID-M1-board.patch | [01/13] dt-bindings: rockchip: Add Hardkernel ODROID-M1 board Add device tree binding for Hardkernel ODROID-M1 board based on RK3568 SoC. |
Dongjin Kim <tobetter@gmail.com> | no | https://git.kernel.org/linus/19cc53eb2ce63c0e5adc2fd89494fb16f383ac10 | 2022-09-30 | |
| features/arm64/arm64-dts-rockchip-Add-Hardkernel-ODROID-M1-board.patch | [02/13] arm64: dts: rockchip: Add Hardkernel ODROID-M1 board This patch is to add a device tree for new board Hardkernel ODROID-M1 based on Rockchip RK3568, includes basic peripherals - uart/eMMC/uSD/i2c and on-board ethernet. [aurelien@aurel32.net: addressed issues from initial review] |
Dongjin Kim <tobetter@gmail.com> | no | https://git.kernel.org/linus/fd35832677032980df230f02509d6c016664cc89 | 2022-09-30 | |
| features/arm64/arm64-dts-rockchip-add-thermal-support-to-ODROID-M1.patch | [03/13] arm64: dts: rockchip: add thermal support to ODROID-M1 Add the thermal nodes for the ODROID-M1. |
Aurelien Jarno <aurelien@aurel32.net> | no | https://git.kernel.org/linus/f5511bd8498da222b6455038a0cf3e7d2b2dfc7e | 2022-09-30 | |
| features/arm64/arm64-dts-rockchip-Add-NOR-flash-to-ODROID-M1.patch | [04/13] arm64: dts: rockchip: Add NOR flash to ODROID-M1 Enable the Rockchip Serial Flash Controller for the ODROID-M1 and add the corresponding SPI NOR flash entry. The SFC is used in dual I/O mode and not quad I/O mode, as the FSPI_D2 pin is shared with the EMMC_RSTn pin. The partitions addresses and sizes are taken from the ODROID-M1 Partition Table page on the ODROID wiki. |
Aurelien Jarno <aurelien@aurel32.net> | no | https://git.kernel.org/linus/9f96204b7dcf94d03cad41194447c665d10675b7 | 2022-09-30 | |
| features/arm64/arm64-dts-rockchip-Add-analog-audio-on-ODROID-M1.patch | [05/13] arm64: dts: rockchip: Add analog audio on ODROID-M1 On the ODROID-M1, the I2S1 TDM controller is connected to the rk809 codec in I2S mode. It is used to provide a stereo headphones output and a mono speaker output. A GPIO with an external pullup is used as an headphone detection input. |
Aurelien Jarno <aurelien@aurel32.net> | no | https://git.kernel.org/linus/78f858447cb78cac7259093d095fb783328b835c | 2022-09-30 | |
| features/arm64/arm64-dts-rockchip-Enable-vop2-and-hdmi-tx-on-ODROID.patch | [06/13] arm64: dts: rockchip: Enable vop2 and hdmi tx on ODROID-M1 Enable the RK356x Video Output Processor (VOP) 2 on ODROID M1. |
Aurelien Jarno <aurelien@aurel32.net> | no | https://git.kernel.org/linus/913404aa2e60610f9cae375069dae97e11d726ed | 2022-09-30 | |
| features/arm64/arm64-dts-rockchip-Enable-HDMI-audio-on-ODROID-M1.patch | [07/13] arm64: dts: rockchip: Enable HDMI audio on ODROID-M1. This enables the i2s0 controller and the hdmi-sound node on the ODROID-M1. |
Aurelien Jarno <aurelien@aurel32.net> | no | https://git.kernel.org/linus/1ca7ddddf36494f0f6afd4f35d37827323271f39 | 2022-09-30 | |
| features/arm64/arm64-dts-rockchip-Enable-the-GPU-on-ODROID-M1.patch | [08/13] arm64: dts: rockchip: Enable the GPU on ODROID-M1 Enable the GPU core on the Rockchip RK3568 ODROID-M1. |
Aurelien Jarno <aurelien@aurel32.net> | no | https://git.kernel.org/linus/cb80b3455c7cadc4c1157879930e919f607d557c | 2022-09-30 | |
| features/arm64/arm64-dts-rockchip-Enable-the-USB-2.0-ports-on-ODROI.patch | [09/13] arm64: dts: rockchip: Enable the USB 2.0 ports on ODROID-M1 The Rockchip RK3568 has two USB OHCI/EHCI controllers connected to a PHY providing one host-only port and one OTG port. On the ODROID-M1, they are both used in host mode. The USB ports are powered by a DC/DC converter providing 5V and named VCC5V0_SYS on the schematics, followed by a power switch. |
Aurelien Jarno <aurelien@aurel32.net> | no | https://git.kernel.org/linus/4685d7b68aaac199ab0d950d2047405bf551f964 | 2022-09-30 | |
| features/arm64/arm64-dts-rockchip-Enable-the-USB-3.0-ports-on-ODROI.patch | [10/13] arm64: dts: rockchip: Enable the USB 3.0 ports on ODROID-M1 The Rockchip RK3568 has two USB XHCI controllers. The USB 2.0 signals are connected to a PHY providing one host-only port and one OTG port. The USB 3.0 signals are connected to two USB3.0/PCIE/SATA combo PHY. The ODROID M1 has 2 type A USB 3.0 connectors, with the USB 3.0 signals connected to the two combo PHYs. For the USB 2.0 signals, one connector is connected to the host-only PHY and uses the same power switch as the USB 2.0 ports. The other connector has its own power switch and is connected to the OTG PHY, which is also connected to a device only micro-USB connector. The purpose of this micro-USB connector is for firmware update using the Rockusb vendor specific USB class. Therefore it does not make sense to enable this port on Linux, and the PHY is forced to host mode. |
Aurelien Jarno <aurelien@aurel32.net> | no | https://git.kernel.org/linus/9984ef562653c8d0beb51021fc286706b6ec4802 | 2022-09-30 | |
| features/arm64/arm64-dts-rockchip-Add-SATA-support-to-ODROID-M1.patch | [11/13] arm64: dts: rockchip: Add SATA support to ODROID-M1 Enable the Combo PHY and SATA nodes in ODROID-M1. |
Aurelien Jarno <aurelien@aurel32.net> | no | https://git.kernel.org/linus/6a5a04d52ccc42e0e59ff69fca9c1db7e08ba44b | 2022-09-30 | |
| features/arm64/arm64-dts-rockchip-Add-PCIEe-v3-nodes-to-ODROID-M1.patch | [12/13] arm64: dts: rockchip: Add PCIEe v3 nodes to ODROID-M1 Add nodes to ODROID-M1 to support PCIe v3 on the M2 slot. |
Aurelien Jarno <aurelien@aurel32.net> | no | https://git.kernel.org/linus/35b28582aa3dfd7b6861b7ebc72798b0ff50ed41 | 2022-09-30 | |
| features/arm64/arm64-dts-rockchip-Add-IR-receiver-node-to-ODROID-M1.patch | [13/13] arm64: dts: rockchip: Add IR receiver node to ODROID-M1 Add the infrared receiver and its associated pinctrl entry. Note that there is an external pullup to VCC3V3_SYS. |
Aurelien Jarno <aurelien@aurel32.net> | no | https://git.kernel.org/linus/d6882992fe8182e3122be34af3f491948a8b9069 | 2022-09-30 | |
| features/x86/x86-memtest-WARN-if-bad-RAM-found.patch | x86: memtest: WARN if bad RAM found Since this is not a particularly thorough test, if we find any bad bits of RAM then there is a fair chance that there are other bad bits we fail to detect. |
Ben Hutchings <ben@decadent.org.uk> | yes | debian | 2011-12-05 | |
| features/x86/x86-make-x32-syscall-support-conditional.patch | x86: Make x32 syscall support conditional on a kernel parameter Enabling x32 in the standard amd64 kernel would increase its attack surface while provide no benefit to the vast majority of its users. No-one seems interested in regularly checking for vulnerabilities specific to x32 (at least no-one with a white hat). Still, adding another flavour just to turn on x32 seems wasteful. And the only differences on syscall entry are a few instructions that mask out the x32 flag and compare the syscall number. Use a static key to control whether x32 syscalls are really enabled, a Kconfig parameter to set its default value and a kernel parameter "syscall.x32" to change it at boot time. |
Ben Hutchings <ben@decadent.org.uk> | yes | debian | 2018-02-12 | |
| bugfix/arm64/arm64-dts-rockchip-fix-spdif-fe460000-ordering-on-rk.patch | arm64: dts: rockchip: fix spdif@fe460000 ordering on rk356x Move the node to its correct position, based on its mmio-address. |
Heiko Stuebner <heiko@sntech.de> | no | https://git.kernel.org/linus/d4eade428d22f2ac5f32b12ec183fdff84dc07a6 | 2022-10-30 | |
| features/arm64/quartz64/arm64-dts-rockchip-RK356x-Add-I2S2-device-node.patch | arm64: dts: rockchip: RK356x: Add I2S2 device node This patch adds I2S2 device tree node for RK3566/RK3568. |
Shengyu Qu <wiagn233@outlook.com> | no | https://git.kernel.org/linus/755f37010f3eac0bdfa41bdf2308e8380a93f10c | 2022-10-30 | |
| features/arm64/quartz64/arm64-dts-rockchip-Enable-video-output-and-HDMI-on-S.patch | arm64: dts: rockchip: Enable video output and HDMI on SOQuartz This patch adds and enables the necessary device tree nodes to enable video output and HDMI functionality on the SOQuartz module. |
Nicolas Frattaroli <frattaroli.nicolas@gmail.com> | no | https://git.kernel.org/linus/36d7a605706d9648526a0574b8e7b0e02fa70c2a | 2022-11-12 | |
| features/arm64/quartz64/arm64-dts-rockchip-Enable-HDMI-sound-on-SOQuartz.patch | arm64: dts: rockchip: Enable HDMI sound on SOQuartz This patch enables the i2s0 node on SOQuartz, which is responsible for hdmi audio, and adds an hdmi-sound node to enable said audio. |
Nicolas Frattaroli <frattaroli.nicolas@gmail.com> | no | https://git.kernel.org/linus/70b620c4ba919a87c607b8d98b08478b213877bd | 2022-11-12 | |
| features/arm64/quartz64/arm64-dts-rockchip-Enable-PCIe-2-on-SOQuartz-CM4IO.patch | arm64: dts: rockchip: Enable PCIe 2 on SOQuartz CM4IO This patch enables the PCIe2 on the CM4IO board when paired with a SOQuartz CM4 System-on-Module board. combphy2 also needs to be enabled in this case to make the PHY work for this. |
Nicolas Frattaroli <frattaroli.nicolas@gmail.com> | no | https://git.kernel.org/linus/3736aa7ecc4cd9b4abce30052bad00aba4f0362f | 2022-11-12 | |
| features/arm64/quartz64/dt-bindings-arm-rockchip-Add-SOQuartz-Blade.patch | [1/4] dt-bindings: arm: rockchip: Add SOQuartz Blade Add a compatible for the SOQuartz Blade base board to the rockchip platforms binding. The SOQuartz Blade is a PoE-capable carrier board for the CM4 SoM form factor, designed around the SOQuartz CM4 System-on-Module. The board features the usual connectivity (GPIO, USB, HDMI, Ethernet) and an M.2 slot for SSDs. It may also be powered from a 5V barrel jack input, and has a 3.5mm jack for UART debug output. |
Nicolas Frattaroli <frattaroli.nicolas@gmail.com> | no | https://git.kernel.org/linus/8c84c2e51f3ee39b40e8078ebe3ad9c01fb17aff | 2022-11-16 | |
| features/arm64/quartz64/arm64-dts-rockchip-Add-SOQuartz-blade-board.patch | [2/4] arm64: dts: rockchip: Add SOQuartz blade board This adds a device tree for the PINE64 SOQuartz blade baseboard, a 1U rack mountable baseboard for the CM4 form factor with PoE support designed for the SOQuartz CM4 System-on-Module. The board takes power from either PoE or a 5V DC input, and allows for mounting an M.2 SSD. The board also features one USB 2.0 host port, one HDMI output, a 3.5mm jack for UART, and the aforementioned gigabit networking port. [rebase, squash, reword, misc fixes] |
Andrew Powers-Holmes <aholmes@omnom.net> | no | https://git.kernel.org/linus/a5c826ecde5222f755e7d8a0c8d795189c5c1228 | 2022-11-16 | |
| features/arm64/quartz64/dt-bindings-arm-rockchip-Add-SOQuartz-Model-A.patch | [3/4] dt-bindings: arm: rockchip: Add SOQuartz Model A The SOQuartz Model A base board is a carrier board for the CM4 form factor, designed around the PINE64 SOQuartz CM4 SoM. The board sports "Model A" dimensions like the Quartz64 Model A, but is not to be confused with that. As for I/O, it features USB 2 ports, Gigabit Ethernet, a PCIe 2 x1 slot, HDMI, a 40-pin GPIO header, CSI/DSI connectors, an eDP flat-flex cable connector, a 12V DC barrel jack for power input and power/reset buttons as well as a microSD card slot. |
Nicolas Frattaroli <frattaroli.nicolas@gmail.com> | no | https://git.kernel.org/linus/7441d8c437883581dddfb616a087b399338244f0 | 2022-11-16 | |
| features/arm64/quartz64/arm64-dts-rockchip-Add-SOQuartz-Model-A-baseboard.patch | [4/4] arm64: dts: rockchip: Add SOQuartz Model A baseboard This patch adds the device tree for the "Model A" baseboard for the SOQuartz CM4 SoM, which is not to be confused with the Quartz64 Model A, which is the same form factor and SoC, but is not a CM4 carrier board. The board features a PCIe 2 x1 slot, USB 2 host ports, CSI/DSI connectors, an eDP FFC connector, gigabit ethernet, HDMI, and a 12V DC barrel jack. Also present is a microSD card slot, 40-pin GPIO, and a power and reset button. [rebase, misc fixes, reword] |
Andrew Powers-Holmes <aholmes@omnom.net> | no | https://git.kernel.org/linus/afbaed737fb45bcae91e4606025fb31da71b9dfe | 2022-11-16 | |
| bugfix/all/disable-some-marvell-phys.patch | phy/marvell: disable 4-port phys The Marvell PHY was originally disabled because it can cause networking failures on some systems. According to Lennert Buytenhek this is because some of the variants added did not share the same register layout. Since the known cases are all 4-ports disable those variants (indicated by a 4 in the penultimate position of the model name) until they can be audited for correctness. [bwh: Also #if-out the init functions for these PHYs to avoid compiler warnings] |
Ian Campbell <ijc@hellion.org.uk> | yes | debian | 2013-11-20 | |
| bugfix/all/fs-add-module_softdep-declarations-for-hard-coded-cr.patch | fs: Add MODULE_SOFTDEP declarations for hard-coded crypto drivers This helps initramfs builders and other tools to find the full dependencies of a module. [Lukas Wunner: Forward-ported to 4.11: drop parts applied upstream] |
Ben Hutchings <ben@decadent.org.uk> | yes | debian | 2016-04-13 | |
| features/all/lockdown/efi-add-an-efi_secure_boot-flag-to-indicate-secure-b.patch | [28/30] efi: Add an EFI_SECURE_BOOT flag to indicate secure boot mode UEFI machines can be booted in Secure Boot mode. Add an EFI_SECURE_BOOT flag that can be passed to efi_enabled() to find out whether secure boot is enabled. Move the switch-statement in x86's setup_arch() that inteprets the secure_boot boot parameter to generic code and set the bit there. [rperier: Forward-ported to 5.5: - Use pr_warn() - Adjust context] [bwh: Forward-ported to 5.6: adjust context] [bwh: Forward-ported to 5.7: - Use the next available bit in efi.flags - Adjust context] |
David Howells <dhowells@redhat.com> | no | https://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs.git/commit?id=a5d70c55c603233c192b375f72116a395909da28 | 2019-02-18 | |
| features/all/lockdown/efi-lock-down-the-kernel-if-booted-in-secure-boot-mo.patch | efi: Lock down the kernel if booted in secure boot mode Based on an earlier patch by David Howells, who wrote the following description: > UEFI Secure Boot provides a mechanism for ensuring that the firmware will > only load signed bootloaders and kernels. Certain use cases may also > require that all kernel modules also be signed. Add a configuration option > that to lock down the kernel - which includes requiring validly signed > modules - if the kernel is secure-booted. [Salvatore Bonaccorso: After fixing https://bugs.debian.org/956197 the help text for LOCK_DOWN_IN_EFI_SECURE_BOOT needs to be adjusted to mention that lockdown is triggered in integrity mode] |
Ben Hutchings <ben@decadent.org.uk> | no | 2019-09-10 | ||
| features/all/lockdown/mtd-disable-slram-and-phram-when-locked-down.patch | mtd: phram,slram: Disable when the kernel is locked down These drivers allow mapping arbitrary memory ranges as MTD devices. This should be disabled to preserve the kernel's integrity when it is locked down. * Add the HWPARAM flag to the module parameters * When slram is built-in, it uses __setup() to read kernel parameters, so add an explicit check security_locked_down() check |
Ben Hutchings <ben@decadent.org.uk> | yes | 2019-08-30 | ||
| features/all/lockdown/arm64-add-kernel-config-option-to-lock-down-when.patch | arm64: add kernel config option to lock down when in Secure Boot mode Add a kernel configuration option to lock down the kernel, to restrict userspace's ability to modify the running kernel when UEFI Secure Boot is enabled. Based on the x86 patch by Matthew Garrett. Determine the state of Secure Boot in the EFI stub and pass this to the kernel using the FDT. [bwh: Forward-ported to 4.10: adjust context] [Lukas Wunner: Forward-ported to 4.11: drop parts applied upstream] [bwh: Forward-ported to 4.15 and lockdown patch set: - Pass result of efi_get_secureboot() in stub through to efi_set_secure_boot() in main kernel - Use lockdown API and naming] [bwh: Forward-ported to 4.19.3: adjust context in update_fdt()] [dannf: Moved init_lockdown() call after uefi_init(), fixing SB detection] [bwh: Drop call to init_lockdown(), as efi_set_secure_boot() now calls this] [bwh: Forward-ported to 5.6: efi_get_secureboot() no longer takes a sys_table parameter] [bwh: Forward-ported to 5.7: EFI initialisation from FDT was rewritten, so: - Add Secure Boot mode to the parameter enumeration in fdtparams.c - Add a parameter to efi_get_fdt_params() to return the Secure Boot mode - Since Xen does not have a property name defined for Secure Boot mode, change efi_get_fdt_prop() to handle a missing property name by clearing the output variable] [Salvatore Bonaccorso: Forward-ported to 5.10: f30f242fb131 ("efi: Rename arm-init to efi-init common for all arch") renamed arm-init.c to efi-init.c] |
Linn Crosetto <linn@hpe.com> | no | debian | 2016-08-30 | |
| features/all/db-mok-keyring/0003-MODSIGN-checking-the-blacklisted-hash-before-loading-a-kernel-module.patch | [PATCH 3/4] MODSIGN: checking the blacklisted hash before loading a kernel module This patch adds the logic for checking the kernel module's hash base on blacklist. The hash must be generated by sha256 and enrolled to dbx/mokx. For example: sha256sum sample.ko mokutil --mokx --import-hash $HASH_RESULT Whether the signature on ko file is stripped or not, the hash can be compared by kernel. [Rebased by Luca Boccassi] [bwh: Forward-ported to 5.19: - The type parameter to is_hash_blacklisted() is now an enumeration rather than a string - Adjust filename, context] |
"Lee, Chun-Yi" <joeyli.kernel@gmail.com> | no | https://lore.kernel.org/patchwork/patch/933175/ | 2018-03-13 | |
| features/all/db-mok-keyring/KEYS-Make-use-of-platform-keyring-for-module-signature.patch | [PATCH] KEYS: Make use of platform keyring for module signature verify This allows a cert in DB to be used to sign modules, in addition to certs in the MoK and built-in keyrings. [bwh: Forward-ported to 5.19: adjust filename] [наб: reinstate for 6.1, re-write description] |
Robert Holmes <robeholmes@gmail.com> | yes | debian | https://src.fedoraproject.org/rpms/kernel/raw/master/f/KEYS-Make-use-of-platform-keyring-for-module-signature.patch | 2019-04-23 |
| features/all/db-mok-keyring/trust-machine-keyring-by-default.patch | trust machine keyring (MoK) by default Debian always trusted keys in MoK by default. Upstream made it conditional on a new EFI variable being set. To keep backward compatibility skip this check. |
Luca Boccassi <bluca@debian.org> | no | |||
| debian/i386-686-pae-pci-set-pci-nobios-by-default.patch | [i386/686-pae] PCI: Set pci=nobios by default CONFIG_PCI_GOBIOS results in physical addresses 640KB-1MB being mapped W+X, which is undesirable for security reasons and will result in a warning at boot now that we enable CONFIG_DEBUG_WX. This can be overridden using the kernel parameter "pci=nobios", but we want to disable W+X by default. Disable PCI BIOS probing by default; it can still be enabled using "pci=bios". |
Ben Hutchings <ben@decadent.org.uk> | not-needed | 2016-02-16 | ||
| debian/ntfs-mark-it-as-broken.patch | ntfs: mark it as broken NTFS has unfixed issues CVE-2018-12929, CVE-2018-12930, and CVE-2018-12931. ntfs-3g is a better supported alternative. Make sure it can't be enabled even in custom kernels. |
Ben Hutchings <ben@decadent.org.uk> | no | 2019-04-25 | ||
| bugfix/all/module-disable-matching-missing-version-crc.patch | module: Disable matching missing version CRC This partly reverts commit cd3caefb4663e3811d37cc2afad3cce642d60061. We want to fail closed if a symbol version CRC is missing, as the alternative may allow subverting module signing. |
Ben Hutchings <ben@decadent.org.uk> | not-needed | 2016-12-02 | ||
| bugfix/all/usbip-document-tcp-wrappers.patch | usbip: Document TCP wrappers Add references to TCP wrappers configuration in the manual page. |
Ben Hutchings <ben@decadent.org.uk> | no | 2012-06-24 | ||
| bugfix/all/kbuild-fix-recordmcount-dependency.patch | kbuild: Fix recordmcount dependency for OOT modules We never rebuild anything in-tree when building an out-of-tree modules, so external modules should not depend on the recordmcount sources. |
Ben Hutchings <ben@decadent.org.uk> | no | 2014-09-08 | ||
| bugfix/all/tools-perf-man-date.patch | perf tools: Use $KBUILD_BUILD_TIMESTAMP as man page date This allows man pages to be built reproducibly. |
Ben Hutchings <ben@decadent.org.uk> | yes | 2015-07-13 | ||
| bugfix/all/tools-perf-remove-shebangs.patch | tools/perf: Remove shebang lines from perf scripts perf scripts need to be invoked through perf, not directly through perl (or other language interpreter). So including shebang lines in them is useless and possibly misleading. |
Ben Hutchings <ben@decadent.org.uk> | no | 2015-09-25 | ||
| bugfix/x86/revert-perf-build-fix-libunwind-feature-detection-on.patch | Revert "perf build: Fix libunwind feature detection on 32-bit x86" This reverts commit 05b41775e2edd69a83f592e3534930c934d4038e. It broke feature detection that was working just fine for us. |
Ben Hutchings <ben@decadent.org.uk> | no | 2015-09-25 | ||
| bugfix/all/tools-build-remove-bpf-run-time-check-at-build-time.patch | tools/build: Remove bpf() run-time check at build time It is not correct to test that a syscall works on the build system's kernel. We might be building on an earlier kernel version or with security restrictions that block bpf(). |
Ben Hutchings <ben@decadent.org.uk> | no | 2016-02-21 | ||
| bugfix/all/cpupower-bump-soname-version.patch | cpupower: Bump soname version Several functions in the libcpupower API are renamed or removed in Linux 4.7. This is an backward-incompatible ABI change, so the library soname should change from libcpupower.so.0 to libcpupower.so.1. |
Ben Hutchings <ben@decadent.org.uk> | yes | 2016-06-09 | ||
| bugfix/all/cpupower-fix-checks-for-cpu-existence.patch | cpupower: Fix checks for CPU existence Calls to cpufreq_cpu_exists(cpu) were converted to cpupower_is_cpu_online(cpu) when libcpupower was introduced and the former function was deleted. However, cpupower_is_cpu_online() does not distinguish physically absent and offline CPUs, and does not set errno. cpufreq-set has already been fixed (commit c25badc9ceb6). In cpufreq-bench, which prints an error message for offline CPUs, properly distinguish and report the zero and negative cases. [carnil: Update/Refresh patch for 4.14.17: The issue with the incorrect check has been fixed with upstream commit 53d1cd6b125f. Keep in the patch the distinction and report for the zero and negative cases.] |
Ben Hutchings <ben@decadent.org.uk> | yes | 2016-11-03 | ||
| bugfix/all/tools-perf-pmu-events-fix-reproducibility.patch | tools/perf: pmu-events: Fix reproducibility jevents.py enumerates files and outputs the corresponding C structs in the order they are found. This makes it sensitive to directory ordering, so that the perf executable is not reproducible. To avoid this, sort the entries returned by os.scandir() before processing them. |
Ben Hutchings <ben@decadent.org.uk> | yes | 2019-08-25 | ||
| bugfix/all/libapi-define-_fortify_source-as-2-not-empty.patch | libapi: Define _FORTIFY_SOURCE as 2, not empty | Ben Hutchings <benh@debian.org> | no | 2022-01-15 | ||
| bugfix/all/tools-perf-fix-missing-ldflags-for-some-programs.patch | tools/perf: Fix missing LDFLAGS for some programs | Ben Hutchings <benh@debian.org> | no | 2022-01-15 | ||
| bugfix/powerpc/fbdev-offb-Update-expected-device-name.patch | fbdev/offb: Update expected device name Since commit 241d2fb56a18 ("of: Make OF framebuffer device names unique"), as spotted by Frédéric Bonnard, the historical "of-display" device is "of-display.N" as required. This means that offb no longer finds the expected device, which prevents the Debian Installer from setting up its interface, at least on ppc64el. It might be better to iterate on all possible nodes, but updating the hardcoded device from "of-display" to "of-display.0" is confirmed to fix the Debian Installer at the very least. |
Cyril Brulebois <cyril@debamax.com> | no | https://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev.git/commit?id=27c74ea74be805ccba1bc1a0a03cc79c51dca6ea | 2023-04-12 | |
| features/all/ethernet-microsoft/0001-net-Remove-the-obsolte-u64_stats_fetch_-_irq-users-d.patch | [PATCH 01/34] net: Remove the obsolte u64_stats_fetch_*_irq() users (drivers). Now that the 32bit UP oddity is gone and 32bit uses always a sequence count, there is no need for the fetch_irq() variants anymore. Convert to the regular interface. (cherry picked from commit 068c38ad88ccb09e5e966d4db5cedab0e02b3b95) |
Bastian Blank <waldi@debian.org> | no | 2023-07-12 | ||
| features/all/ethernet-microsoft/0002-net-mana-Assign-interrupts-to-CPUs-based-on-NUMA-nod.patch | [PATCH 02/34] net: mana: Assign interrupts to CPUs based on NUMA nodes In large VMs with multiple NUMA nodes, network performance is usually best if network interrupts are all assigned to the same virtual NUMA node. This patch assigns online CPU according to a numa aware policy, local cpus are returned first, followed by non-local ones, then it wraps around. (cherry picked from commit 71fa6887eeca7b631528f9c7a39815498de8028c) |
Saurabh Sengar <ssengar@linux.microsoft.com> | no | 2022-10-31 | ||
| features/all/ethernet-microsoft/0003-net-mana-Add-support-for-auxiliary-device.patch | [PATCH 03/34] net: mana: Add support for auxiliary device In preparation for supporting MANA RDMA driver, add support for auxiliary device in the Ethernet driver. The RDMA device is modeled as an auxiliary device to the Ethernet device. (cherry picked from commit a69839d4327d053b18d8e1b0e7ddeee78db78f4f) |
Long Li <longli@microsoft.com> | no | 2022-11-03 | ||
| features/all/ethernet-microsoft/0004-net-mana-Record-the-physical-address-for-doorbell-pa.patch | [PATCH 04/34] net: mana: Record the physical address for doorbell page region For supporting RDMA device with multiple user contexts with their individual doorbell pages, record the start address of doorbell page region for use by the RDMA driver to allocate user context doorbell IDs. (cherry picked from commit f3dc096246091048677c45cfc0e24ad512927b52) |
Long Li <longli@microsoft.com> | no | 2022-11-03 | ||
| features/all/ethernet-microsoft/0005-net-mana-Handle-vport-sharing-between-devices.patch | [PATCH 05/34] net: mana: Handle vport sharing between devices For outgoing packets, the PF requires the VF to configure the vport with corresponding protection domain and doorbell ID for the kernel or user context. The vport can't be shared between different contexts. Implement the logic to exclusively take over the vport by either the Ethernet device or RDMA device. (cherry picked from commit b5c1c9855be3b5b978fde975a63df3cabc273faa) |
Long Li <longli@microsoft.com> | no | 2022-11-03 | ||
| features/all/ethernet-microsoft/0006-net-mana-Set-the-DMA-device-max-segment-size.patch | [PATCH 06/34] net: mana: Set the DMA device max segment size MANA hardware doesn't have any restrictions on the DMA segment size, set it to the max allowed value. (cherry picked from commit 6fe254160bd033a1e62dbad9b734183b31144678) |
Ajay Sharma <sharmaajay@microsoft.com> | no | 2022-11-03 | ||
| features/all/ethernet-microsoft/0007-net-mana-Export-Work-Queue-functions-for-use-by-RDMA.patch | [PATCH 07/34] net: mana: Export Work Queue functions for use by RDMA driver RDMA device may need to create Ethernet device queues for use by Queue Pair type RAW. This allows a user-mode context accesses Ethernet hardware queues. Export the supporting functions for use by the RDMA driver. (cherry picked from commit 4c0ff7a106e16ab63e0b597557255c012f179578) |
Long Li <longli@microsoft.com> | no | 2022-11-03 | ||
| features/all/ethernet-microsoft/0008-net-mana-Record-port-number-in-netdev.patch | [PATCH 08/34] net: mana: Record port number in netdev The port number is useful for user-mode application to identify this net device based on port index. Set to the correct value in ndev. (cherry picked from commit d44089e555ffe63a49cc6e94d0c03d933e413059) |
Long Li <longli@microsoft.com> | no | 2022-11-03 | ||
| features/all/ethernet-microsoft/0009-net-mana-Move-header-files-to-a-common-location.patch | [PATCH 09/34] net: mana: Move header files to a common location In preparation to add MANA RDMA driver, move all the required header files to a common location for use by both Ethernet and RDMA drivers. (cherry picked from commit fd325cd648f15eb9a8b32a68de3bafc72bcfe753) |
Long Li <longli@microsoft.com> | no | 2022-11-03 | ||
| features/all/ethernet-microsoft/0010-net-mana-Define-max-values-for-SGL-entries.patch | [PATCH 10/34] net: mana: Define max values for SGL entries The number of maximum SGl entries should be computed from the maximum WQE size for the intended queue type and the corresponding OOB data size. This guarantees the hardware queue can successfully queue requests up to the queue depth exposed to the upper layer. (cherry picked from commit aa56549792fb348892fbbae67f6f0c71bb750b65) |
Long Li <longli@microsoft.com> | no | 2022-11-03 | ||
| features/all/ethernet-microsoft/0011-net-mana-Define-and-process-GDMA-response-code-GDMA_.patch | [PATCH 11/34] net: mana: Define and process GDMA response code GDMA_STATUS_MORE_ENTRIES When doing memory registration, the PF may respond with GDMA_STATUS_MORE_ENTRIES to indicate a follow request is needed. This is not an error and should be processed as expected. (cherry picked from commit de372f2a9ca7ada2698ecac7df8f02407cd98fa0) |
Ajay Sharma <sharmaajay@microsoft.com> | no | 2022-11-03 | ||
| features/all/ethernet-microsoft/0012-net-mana-Define-data-structures-for-protection-domai.patch | [PATCH 12/34] net: mana: Define data structures for protection domain and memory registration The MANA hardware support protection domain and memory registration for use in RDMA environment. Add those definitions and expose them for use by the RDMA driver. (cherry picked from commit 28c66cfa45388af1126985d1114e0ed762eb2abd) |
Ajay Sharma <sharmaajay@microsoft.com> | no | 2022-11-03 | ||
| features/all/ethernet-microsoft/0013-net-mana-Fix-return-type-of-mana_start_xmit.patch | [PATCH 13/34] net: mana: Fix return type of mana_start_xmit() The ndo_start_xmit field in net_device_ops is expected to be of type netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev). The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition. A new warning in clang will catch this at compile time: drivers/net/ethernet/microsoft/mana/mana_en.c:382:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict] .ndo_start_xmit = mana_start_xmit, ^~~~~~~~~~~~~~~ 1 error generated. The return type of mana_start_xmit should be changed from int to netdev_tx_t. [nathan: Rebase on net-next and resolve conflicts Add note about new clang warning] (cherry picked from commit 0c9ef08a4d0fd6c5e6000597b506235d71a85a61) |
Nathan Huckleberry <nhuck@google.com> | no | 2022-11-08 | ||
| features/all/ethernet-microsoft/0014-net-mana-Fix-accessing-freed-irq-affinity_hint.patch | [PATCH 14/34] net: mana: Fix accessing freed irq affinity_hint After calling irq_set_affinity_and_hint(), the cpumask pointer is saved in desc->affinity_hint, and will be used later when reading /proc/irq/<num>/affinity_hint. So the cpumask variable needs to be persistent. Otherwise, we are accessing freed memory when reading the affinity_hint file. Also, need to clear affinity_hint before free_irq(), otherwise there is a one-time warning and stack trace during module unloading: [ 243.948687] WARNING: CPU: 10 PID: 1589 at kernel/irq/manage.c:1913 free_irq+0x318/0x360 ... [ 243.948753] Call Trace: [ 243.948754] <TASK> [ 243.948760] mana_gd_remove_irqs+0x78/0xc0 [mana] [ 243.948767] mana_gd_remove+0x3e/0x80 [mana] [ 243.948773] pci_device_remove+0x3d/0xb0 [ 243.948778] device_remove+0x46/0x70 [ 243.948782] device_release_driver_internal+0x1fe/0x280 [ 243.948785] driver_detach+0x4e/0xa0 [ 243.948787] bus_remove_driver+0x70/0xf0 [ 243.948789] driver_unregister+0x35/0x60 [ 243.948792] pci_unregister_driver+0x44/0x90 [ 243.948794] mana_driver_exit+0x14/0x3fe [mana] [ 243.948800] __do_sys_delete_module.constprop.0+0x185/0x2f0 To fix the bug, use the persistent mask, cpumask_of(cpu#), and set affinity_hint to NULL before freeing the IRQ, as required by free_irq(). (cherry picked from commit 18a048370b06a3a521219e9e5b10bdc2178ef19c) |
Haiyang Zhang <haiyangz@microsoft.com> | no | 2023-02-06 | ||
| features/all/ethernet-microsoft/0015-net-mana-Add-new-MANA-VF-performance-counters-for-ea.patch | [PATCH 15/34] net: mana: Add new MANA VF performance counters for easier troubleshooting Extended performance counter stats in 'ethtool -S <interface>' output for MANA VF to facilitate troubleshooting. (cherry picked from commit bd7fc6e1957c2102866f9e464c1f2302e891b7e9) |
Shradha Gupta <shradhagupta@linux.microsoft.com> | no | 2023-03-15 | ||
| features/all/ethernet-microsoft/0016-net-mana-Remove-redundant-pci_clear_master.patch | [PATCH 16/34] net: mana: Remove redundant pci_clear_master Remove pci_clear_master to simplify the code, the bus-mastering is also cleared in do_pci_disable_device, like this: ./drivers/pci/pci.c:2197 static void do_pci_disable_device(struct pci_dev *dev) { u16 pci_command; pci_read_config_word(dev, PCI_COMMAND, &pci_command); if (pci_command & PCI_COMMAND_MASTER) { pci_command &= ~PCI_COMMAND_MASTER; pci_write_config_word(dev, PCI_COMMAND, pci_command); } pcibios_disable_device(dev); }. And dev->is_busmaster is set to 0 in pci_disable_device. (cherry picked from commit 2d59af8307526f2829fdec9c5c5898a857d55180) |
Cai Huoqing <cai.huoqing@linux.dev> | no | 2023-03-23 | ||
| features/all/ethernet-microsoft/0017-net-mana-Use-napi_build_skb-in-RX-path.patch | [PATCH 17/34] net: mana: Use napi_build_skb in RX path Use napi_build_skb() instead of build_skb() to take advantage of the NAPI percpu caches to obtain skbuff_head. (cherry picked from commit ce518bc3e9ca342309995c9270c3ec4892963695) |
Haiyang Zhang <haiyangz@microsoft.com> | no | 2023-04-12 | ||
| features/all/ethernet-microsoft/0018-net-mana-Refactor-RX-buffer-allocation-code-to-prepa.patch | [PATCH 18/34] net: mana: Refactor RX buffer allocation code to prepare for various MTU Move out common buffer allocation code from mana_process_rx_cqe() and mana_alloc_rx_wqe() to helper functions. Refactor related variables so they can be changed in one place, and buffer sizes are in sync. (cherry picked from commit a2917b23497e4205db32271e4e06e142a9f8a6aa) |
Haiyang Zhang <haiyangz@microsoft.com> | no | 2023-04-12 | ||
| features/all/ethernet-microsoft/0019-net-mana-Enable-RX-path-to-handle-various-MTU-sizes.patch | [PATCH 19/34] net: mana: Enable RX path to handle various MTU sizes Update RX data path to allocate and use RX queue DMA buffers with proper size based on potentially various MTU sizes. (cherry picked from commit 2fbbd712baf1c60996554326728bbdbef5616e12) |
Haiyang Zhang <haiyangz@microsoft.com> | no | 2023-04-12 | ||
| features/all/ethernet-microsoft/0020-net-mana-Add-support-for-jumbo-frame.patch | [PATCH 20/34] net: mana: Add support for jumbo frame During probe, get the hardware-allowed max MTU by querying the device configuration. Users can select MTU up to the device limit. When XDP is in use, limit MTU settings so the buffer size is within one page. And, when MTU is set to a too large value, XDP is not allowed to run. Also, to prevent changing MTU fails, and leaves the NIC in a bad state, pre-allocate all buffers before starting the change. So in low memory condition, it will return error, without affecting the NIC. (cherry picked from commit 80f6215b450eb8e92d8b1f117abf5ecf867f963e) |
Haiyang Zhang <haiyangz@microsoft.com> | no | 2023-04-12 | ||
| features/all/ethernet-microsoft/0021-net-mana-Check-if-netdev-napi_alloc_frag-returns-sin.patch | [PATCH 21/34] net: mana: Check if netdev/napi_alloc_frag returns single page netdev/napi_alloc_frag() may fall back to single page which is smaller than the requested size. Add error checking to avoid memory overwritten. (cherry picked from commit df18f2da302f169e1a29098c6ca3b474f1b0269e) |
Haiyang Zhang <haiyangz@microsoft.com> | no | 2023-04-21 | ||
| features/all/ethernet-microsoft/0022-net-mana-Fix-perf-regression-remove-rx_cqes-tx_cqes-.patch | [PATCH 22/34] net: mana: Fix perf regression: remove rx_cqes, tx_cqes counters The apc->eth_stats.rx_cqes is one per NIC (vport), and it's on the frequent and parallel code path of all queues. So, r/w into this single shared variable by many threads on different CPUs creates a lot caching and memory overhead, hence perf regression. And, it's not accurate due to the high volume concurrent r/w. For example, a workload is iperf with 128 threads, and with RPS enabled. We saw perf regression of 25% with the previous patch adding the counters. And this patch eliminates the regression. Since the error path of mana_poll_rx_cq() already has warnings, so keeping the counter and convert it to a per-queue variable is not necessary. So, just remove this counter from this high frequency code path. Also, remove the tx_cqes counter for the same reason. We have warnings & other counters for errors on that path, and don't need to count every normal cqe processing. (cherry picked from commit 1919b39fc6eabb9a6f9a51706ff6d03865f5df29) |
Haiyang Zhang <haiyangz@microsoft.com> | no | 2023-05-26 | ||
| features/all/ethernet-microsoft/0023-net-mana-Add-support-for-vlan-tagging.patch | [PATCH 23/34] net: mana: Add support for vlan tagging To support vlan, use MANA_LONG_PKT_FMT if vlan tag is present in TX skb. Then extract the vlan tag from the skb struct, and save it to tx_oob for the NIC to transmit. For vlan tags on the payload, they are accepted by the NIC too. For RX, extract the vlan tag from CQE and put it into skb. (cherry picked from commit b803d1fded4085d268507a432dac8077ead68971) |
Haiyang Zhang <haiyangz@microsoft.com> | no | 2023-06-09 | ||
| features/all/ethernet-microsoft/0024-RDMA-mana_ib-Use-v2-version-of-cfg_rx_steer_req-to-e.patch | [PATCH 24/34] RDMA/mana_ib: Use v2 version of cfg_rx_steer_req to enable RX coalescing With RX coalescing, one CQE entry can be used to indicate multiple packets on the receive queue. This saves processing time and PCI bandwidth over the CQ. The MANA Ethernet driver also uses the v2 version of the protocol. It doesn't use RX coalescing and its behavior is not changed. (cherry picked from commit 2145328515c8fa9b8a9f7889250bc6c032f2a0e6) |
Long Li <longli@microsoft.com> | no | 2023-05-13 | ||
| features/all/ethernet-microsoft/0025-net-mana-use-vmalloc_array-and-vcalloc.patch | [PATCH 25/34] net: mana: use vmalloc_array and vcalloc Use vmalloc_array and vcalloc to protect against multiplication overflows. The changes were done using the following Coccinelle semantic patch: // <smpl> @initialize:ocaml@ @@ let rename alloc = match alloc with "vmalloc" -> "vmalloc_array" | "vzalloc" -> "vcalloc" | _ -> failwith "unknown" @@ size_t e1,e2; constant C1, C2; expression E1, E2, COUNT, x1, x2, x3; typedef u8; typedef __u8; type t = {u8,__u8,char,unsigned char}; identifier alloc = {vmalloc,vzalloc}; fresh identifier realloc = script:ocaml(alloc) { rename alloc }; @@ ( alloc(x1*x2*x3) | alloc(C1 * C2) | alloc((sizeof(t)) * (COUNT), ...) | - alloc((e1) * (e2)) + realloc(e1, e2) | - alloc((e1) * (COUNT)) + realloc(COUNT, e1) | - alloc((E1) * (E2)) + realloc(E1, E2) ) // </smpl> (cherry picked from commit e9c74f8b8a31f77f8e9d7bbed5fc9f2eacbf32a5) |
Julia Lawall <Julia.Lawall@inria.fr> | no | 2023-06-27 | ||
| features/all/ethernet-microsoft/0026-net-mana-Batch-ringing-RX-queue-doorbell-on-receivin.patch | [PATCH 26/34] net: mana: Batch ringing RX queue doorbell on receiving packets It's inefficient to ring the doorbell page every time a WQE is posted to the received queue. Excessive MMIO writes result in CPU spending more time waiting on LOCK instructions (atomic operations), resulting in poor scaling performance. Move the code for ringing doorbell page to where after we have posted all WQEs to the receive queue during a callback from napi_poll(). With this change, tests showed an improvement from 120G/s to 160G/s on a 200G physical link, with 16 or 32 hardware queues. Tests showed no regression in network latency benchmarks on single connection. (cherry picked from commit da4e8648079eb6f26f3a88d8c34270a057e2bfe6) |
Long Li <longli@microsoft.com> | no | 2023-07-17 | ||
| features/all/ethernet-microsoft/0027-net-mana-Use-the-correct-WQE-count-for-ringing-RQ-do.patch | [PATCH 27/34] net: mana: Use the correct WQE count for ringing RQ doorbell The hardware specification specifies that WQE_COUNT should set to 0 for the Receive Queue. Although currently the hardware doesn't enforce the check, in the future releases it may check on this value. (cherry picked from commit f5e39b57124fd4715d7f0e2f841b8609b38f3e40) |
Long Li <longli@microsoft.com> | no | 2023-07-17 | ||
| features/all/ethernet-microsoft/0028-net-mana-Configure-hwc-timeout-from-hardware.patch | [PATCH 28/34] net: mana: Configure hwc timeout from hardware At present hwc timeout value is a fixed value. This patch sets the hwc timeout from the hardware. It now uses a new hardware capability GDMA_DRV_CAP_FLAG_1_HWC_TIMEOUT_RECONFIG to query and set the value in hwc_timeout. (cherry picked from commit 62c1bff593b7e30041d0273b835af9fd6f5ee737) |
Souradeep Chakrabarti <schakrabarti@linux.microsoft.com> | no | 2023-08-02 | ||
| features/all/ethernet-microsoft/0029-net-mana-Rename-mana_refill_rxoob-and-remove-some-em.patch | [PATCH 29/34] net: mana: Rename mana_refill_rxoob and remove some empty lines Rename mana_refill_rxoob for naming consistency. And remove some empty lines between function call and error checking. (cherry picked from commit 5c74064f43c291d9add2b436a2d70205b71a7cc7) |
Haiyang Zhang <haiyangz@microsoft.com> | no | 2023-04-21 | ||
| features/all/ethernet-microsoft/0030-net-mana-Add-gdma-stats-to-ethtool-output-for-mana.patch | [PATCH 30/34] net: mana: Add gdma stats to ethtool output for mana Extended performance counter stats in 'ethtool -S <interface>' for MANA VF to include GDMA tx LSO packets and bytes count. Testcases: 1. LISA testcase: PERF-NETWORK-TCP-THROUGHPUT-MULTICONNECTION-NTTTCP-Synthetic 2. LISA testcase: PERF-NETWORK-TCP-THROUGHPUT-MULTICONNECTION-NTTTCP-SRIOV 3. Validated the GDMA stat packets and byte counters (cherry picked from commit ac3899c6229649737b9d5cb86e417c98243883dc) |
Shradha Gupta <shradhagupta@linux.microsoft.com> | no | 2023-08-09 | ||
| features/all/ethernet-microsoft/0031-net-mana-Add-remaining-GDMA-stats-for-MANA-to-ethtoo.patch | [PATCH 31/34] net :mana :Add remaining GDMA stats for MANA to ethtool Extend performance counter stats in 'ethtool -S <interface>' for MANA VF to include all GDMA stat counter. Testcases: 1. LISA testcase: PERF-NETWORK-TCP-THROUGHPUT-MULTICONNECTION-NTTTCP-Synthetic 2. LISA testcase: PERF-NETWORK-TCP-THROUGHPUT-MULTICONNECTION-NTTTCP-SRIOV (cherry picked from commit e1df5202e879bce09845ac62bae30206e1edfb80) |
Shradha Gupta <shradhagupta@linux.microsoft.com> | no | 2023-11-24 | ||
| features/all/ethernet-microsoft/0032-net-mana-Fix-Rx-DMA-datasize-and-skb_over_panic.patch | [PATCH 32/34] net: mana: Fix Rx DMA datasize and skb_over_panic mana_get_rxbuf_cfg() aligns the RX buffer's DMA datasize to be multiple of 64. So a packet slightly bigger than mtu+14, say 1536, can be received and cause skb_over_panic. Sample dmesg: [ 5325.237162] skbuff: skb_over_panic: text:ffffffffc043277a len:1536 put:1536 head:ff1100018b517000 data:ff1100018b517100 tail:0x700 end:0x6ea dev:<NULL> [ 5325.243689] ------------[ cut here ]------------ [ 5325.245748] kernel BUG at net/core/skbuff.c:192! [ 5325.247838] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 5325.258374] RIP: 0010:skb_panic+0x4f/0x60 [ 5325.302941] Call Trace: [ 5325.304389] <IRQ> [ 5325.315794] ? skb_panic+0x4f/0x60 [ 5325.317457] ? asm_exc_invalid_op+0x1f/0x30 [ 5325.319490] ? skb_panic+0x4f/0x60 [ 5325.321161] skb_put+0x4e/0x50 [ 5325.322670] mana_poll+0x6fa/0xb50 [mana] [ 5325.324578] __napi_poll+0x33/0x1e0 [ 5325.326328] net_rx_action+0x12e/0x280 As discussed internally, this alignment is not necessary. To fix this bug, remove it from the code. So oversized packets will be marked as CQE_RX_TRUNCATED by NIC, and dropped. (cherry picked from commit c0de6ab920aafb56feab56058e46b688e694a246) |
Haiyang Zhang <haiyangz@microsoft.com> | no | 2024-04-02 | ||
| features/all/ethernet-microsoft/0033-net-mana-Enable-MANA-driver-on-ARM64-with-4K-page-si.patch | [PATCH 33/34] net: mana: Enable MANA driver on ARM64 with 4K page size Change the Kconfig dependency, so this driver can be built and run on ARM64 with 4K page size. 16/64K page sizes are not supported yet. (cherry picked from commit 40a1d11fc670ac03c5dc2e5a9724b330e74f38b0) |
Haiyang Zhang <haiyangz@microsoft.com> | no | 2024-05-13 | ||
| features/all/ethernet-microsoft/0034-net-mana-Fix-the-extra-HZ-in-mana_hwc_send_request.patch | [PATCH 34/34] net: mana: Fix the extra HZ in mana_hwc_send_request Commit 62c1bff593b7 added an extra HZ along with msecs_to_jiffies. This patch fixes that. (cherry picked from commit 9c91c7fadb1771dcc2815c5271d14566366d05c5) |
Souradeep Chakrabarti <schakrabarti@linux.microsoft.com> | no | 2024-05-19 |